"hcloseuk" wrote in message
> my 1989 190e 2.6 auto refuses to start ive replaced distributor cap/
> rotor arm/ coil/ ignition leads/ fuel filter/ 2 new fuel pumps and
> still no difference also checked OVP fuse which was ok any help
> would be gratefull
>
> --
Might need to diagnose the problem a bit further for some help.
1. Crank the engine over and then pull a couple of spark plugs - are they
wet and smell of petrol?
Yes - fuel is getting through the carb - goto 2.
No - there is a fuel delivery problem. Sort that out.
2. Put the spark plug back in the cap and rest it on the engine, then have
someone crank the engine over. Look at the spark, is it a good blue/yellow,
is it regular.
Yes - the ignition circuit is working - but !!!
No - you have to trouble shoot the ignition circuit. Best do a weblookup on
ignition circuit problems and work through those, there are quite a few
items that can cause dramas.
>> Stay informed about: wont start