2001 Accord windshield washer

On Sat, 23 Jun 2007 22:17:40 -0600, motsco_ <motsco_ DeleteThis @interbaun.com>
wrote:

>Flatlander wrote:
>> Our 2001 Accord V6 has had the windshield washer pump fail. Access to
>> the tank is pretty good through a removable panel underneath. However,
>> I can't get the connector off of the pump. It's filled with a
>> waterproofing grease and in an area I can reach with one hand but
>> can't see. I've managed to pull off some sort of plastic shroud on
>> the back of it. Still can't pull the connector off the tank, though.
>> Anybody got an idea what the secret handshake is to get it loose?
>>
>> This would be a 10 minute job if it weren't for that.
>
>=================================
>
>You could visit the dealer or a wrecker to see the actual part, or the
>diagrams at www.slhondaparts might shed some light . . .
>
>'Curly'

Finally got it apart. I managed to clean enough grease off of the
connector to see there is a locking tab on the forward upper part of
the connector housing. You push that in and the connector comes off
with almost no friction. It appears you need to take the power
steering reservior loose for the neck to clear. However, if you put a
quarter turn on the tank as you lower it, everything will drop down
okay.
 >> Stay informed about: 2001 Accord windshield washer 

"Flatlander" <flatlander47.RemoveThis@cox.net> wrote in message
news:jnf683dlme5htmrh7datsaucbthcr1b5nk@4ax.com...
>
> Finally got it apart. I managed to clean enough grease off of the
> connector to see there is a locking tab on the forward upper part of
> the connector housing. You push that in and the connector comes off
> with almost no friction. It appears you need to take the power
> steering reservior loose for the neck to clear. However, if you put a
> quarter turn on the tank as you lower it, everything will drop down
> okay.
>
If we were designing a human today we would be smart to put an eyeball on at
least one fingertip!

Mike
 >> Stay informed about: 2001 Accord windshield washer