weird tail light electrical problems

Okay this is a follow up to an earlier post I made. Here is what I
wrote in it:

hi everyone,

I have a 1989 chevrolet k 1500 4x4 truck. Had some
work done on the
box recently (it was removed) and when i got
it back my tail lights
havent been working properly (the tail light
wires were frayed off about
five years ago when my upper shock mount broke
but were re-wired up and have
worked fine up until now). I have both running
lights, when i hit the brakes
the driver side brake light works but the
driver side reverse light comes on as
well, the other side has no brake light at
all. When i put it in reverse, no reverse
lights work at all lol. I checked the wiring
underneath. everything appears to be wired
up (none loose or anything) and the ground
appears to be ok. any ideas what the hell is
causing this to happen??

Okay, so tonight I replaced all of the old wires with new ones, re-
wired the ground and put new bulbs in the tail lights and guess
what??? They still aren't working right!! As well, putting the right
side signal light on makes the left side reverse light blink??? I
replaced each wire at a time so no to mix them up when i was re-
wiring. Really stumped right now. only thing I can think of is that
the sockets in the tail light circuits must be bad and need replaced.
Anyone got any ideas suggestions??

-M

On Jul 14, 8:43 pm, thirdeye <Illsley1....DeleteThis@gmail.com> wrote:
> Okay this is a follow up to an earlier post I made.  Here is what I
> wrote in it:
>
>                      hi everyone,
>
>                  I have a 1989 chevrolet k 1500 4x4 truck.  Had some
> work done on the
>                         box recently (it was removed) and when i got
> it back my tail lights
>                         havent been working properly (the tail light
> wires were frayed off about
>                         five years ago when my upper shock mount broke
> but were re-wired up and have
>                         worked fine up until now).. I have both running
> lights, when i hit the brakes
>                         the driver side brake light works but the
> driver side reverse light comes on as
>                         well, the other side has no brake light at
> all.  When i put it in reverse, no reverse
>                         lights work at all lol.  I checked the wiring
> underneath.  everything appears to be wired
>                         up (none loose or anything) and the ground
> appears to be ok.  any ideas what the hell is
>                         causing this to happen??
>
> Okay, so tonight I replaced all of the old wires with new ones, re-
> wired the ground and put new bulbs in the tail lights and guess
> what???  They still aren't working right!!  As well, putting the right
> side signal light on makes the left side reverse light blink???  I
> replaced each wire at a time so no to mix them up when i was re-
> wiring.  Really stumped right now.  only thing I can think of is that
> the sockets in the tail light circuits must be bad and need replaced.
> Anyone got any ideas suggestions??
>
> -M

ALright, I'm at my whit's end here. Put new tail light circuits on
both sides tonight. while its a little better, its still messed up.
here's a summary:

Park Lights Off:

Left side -- OK
Right Side -- Both Reverse lights flash
Brake -- Both reverse lights come on, left side brake light comes on.
R -- right side brake light comes on
hazard lights -- both reverse lights flash, left side brake light
flashes, right side brake light does not flash

With Park lights on:

LS -- OK
RS -- Both reverse lights come on
B -- Both Reverse lights come on
R -- Nothing
Hazard -- Both reverse lights flash


No idea where to go from this point. I think I've checked
everything. Anyone got any ideas/suggestions???