How are one touch windows supposed to work in ES 300?

On 12 Aug 2006 12:03:12 -0700, johnkelly RemoveThis @kellypublishing.net wrote:

>Can someone please explain how the passenger side window lever is
>supposed to work on a ES 300 and is it different from the drivers side
>control of that window.

Did you make sure that the passenger window has a one-touch feature? I
seem to remember that on the ES300, only the driver's window has it.
 >> Stay informed about: How are one touch windows supposed to work in ES 300? 

"-" <- RemoveThis @hotmail.com> wrote in message
news:cumtd2d3sctgdccbtpi8g5kastvc4jtms2@4ax.com...
> On 12 Aug 2006 12:03:12 -0700, johnkelly RemoveThis @kellypublishing.net wrote:
>
> >Can someone please explain how the passenger side window lever is
> >supposed to work on a ES 300 and is it different from the drivers side
> >control of that window.
>
> Did you make sure that the passenger window has a one-touch feature? I
> seem to remember that on the ES300, only the driver's window has it.

My 2003 ES 300 has one-touch on all 4 side windows. Any window can be made
to stop part way by lowering then hit the up button and release immediately.
Sometimes a bit of jiggling with the toggle switch may be necessary.
 >> Stay informed about: How are one touch windows supposed to work in ES 300? 

On Sun, 13 Aug 2006 12:23:14 -0400, "Bob" <star7 RemoveThis @NOSPAMbaystreet.ca>
wrote:

>My 2003 ES 300 has one-touch on all 4 side windows. Any window can be made
>to stop part way by lowering then hit the up button and release immediately.
>Sometimes a bit of jiggling with the toggle switch may be necessary.

Sorry, my mistake. Just checked; all four have one-touch windows.
 >> Stay informed about: How are one touch windows supposed to work in ES 300? 

I have a 2002 ES300, all 4 windows have one-touch. If you depress the
button half-way, the one-touch will not engage. If you press the button all
the way, one-touch engages. It's kind of like a digital camera, where a
half-press engages auto focus, while a full push focuses and shoots the
picture. If you're all thumbs and can't get the button to work without
one-touch, then the advice by another poster here will serve you, which is
to briefly reverse the button direction to halt the movement.


<johnkelly RemoveThis @kellypublishing.net> wrote in message
news:1155409392.671246.165910@b28g2000cwb.googlegroups.com...
> Can someone please explain how the passenger side window lever is
> supposed to work on a ES 300 and is it different from the drivers side
> control of that window. Specifically, how is one supposed to get the
> window down or up completely or partially? I thought that if one
> depresses it slightly it will go down until it is released vs if one
> holds it down past the click sound and releases it, it goes down all
> the way. Same with going up but if one wants the window down just a
> couple inches and thus just touches it and release it before it makes a
> click, it goes down all the way.
>
 >> Stay informed about: How are one touch windows supposed to work in ES 300?