taurus V6 93 burning fuse

"hummer321_123 via CarKB.com" <u18517@uwe> wrote:

> It says ACCY Feed Alim Access next to the fuse..... What do you guys
> think ?
>

I think you OUGHT to know what-all DOESNT work when that fuse is blown!

--
Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
you pay..DEAL with it!
 >> Stay informed about: taurus V6 93 burning fuse 

You don't seem to be getting anywhere here. You are looking for someone
to provide a quick solution and you won't find it at your computer
without doing something. Get up, go out there and check things. I think
your old pump is dragging and blowing the fuse. I would be persuaded
differently if you found something else on the circuit with a short
causing the current draw. But the pump is probably old and very
suspect. They do go like this. If that is the case it's a big job to
change it. I would put an amp meter in series with the pump and see
what it draws. It should only be a few amps. If it's close to 10, you
need a pump.
 >> Stay informed about: taurus V6 93 burning fuse 

all he replaced was a c.c.r.m.(constant control relay module) it houses
some of the inportant relays like your fuel pump relay but i would be
looking for a shorted wire but first you must look in your owners
manual to figure out what the fuse supplies power to and then go from
there.
 >> Stay informed about: taurus V6 93 burning fuse