question on shipping fenders

FAQ

Profile

question on shipping fenders

AutoBoardz (Home) -> Rod & Custom

Next: question on shipping fenders

Author

Message

tbustamante

External

Since: Jan 25, 2004
Posts: 14

(Msg. 1) Posted: Mon Sep 05, 2005 9:02 am Post subject: question on shipping fenders Archived from groups: rec>autos>rod-n-custom (more info?)

I just bought a pair of 37 chevy front fenders. They are in Phoenix and I am in the Dallas area. The seller is willing to put them on a shipping pallet and drop them at a shipping depot. Any recommendations on a trucking company to call for something like this? I though of using the bus but am afraid that unless they were boxed they would get damaged. Thanks >> Stay informed about: question on shipping fenders

Display posts from previous:

Related Topics:

Question about exhaust systems - I have a 1937 Chevy here with a 1969 frame and V8 Chevy engine . It has side pipes on each side that end just in front of the back tires . All the exhause pipes and such look new as in not rusty at all . The engine & frame are pretty basic no smog..

Edelbrock carb question - On most of the Edelbrock Performer Series carbs there are two vacuum ports on the front of the carburetor. One is a full-time vacuum port and one is a ported vacuum port. What is the purpose of the two ports? Which would be used for the vacuum..

media blasting/dipping question - I have a couple front fenders and a complete hood assembly (including sides) for a 37 Chevy 2 door sedan. Both need some metal work but I wanted to get them stripped before starting. I live in the Dallas Fort Worth area and was wondering if anybody...

Electric fan question for street rod,, - Hi folks, I recently took off my belt driven fan and went to an electric fan mounted directly on the radiator. It's a puller type. The power to the control circuit is always on and I like the fact that the fan runs for a while after I shut the engine..

media blasting/dipping question in the Dallas area - I have a couple front fenders and a complete hood assembly (including sides) for a 37 Chevy 2 door sedan. Both need some metal work but I wanted to get them stripped before starting. I live in the Dallas Fort Worth area and was wondering if anybody...

	AutoBoardz (Home) -> Rod & Custom	All times are: Pacific Time (US & Canada)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum