 |
|
 |
|
Next: Camshaft position sensor
|
| Author |
Message |

Joined: Dec 13, 2005 Posts: 1
|
(Msg. 1) Posted: Tue Dec 13, 2005 10:22 pm
Post subject: Just replaced starter on 93 Camry, but still won't turn over
|
|
|
I just repalced the starter on my 93 Toyota Camry LE. Upon replacing it, the car started just fine and would continue to do so for about a week. Then one time after having started it earlier that morning, the car would not turn over.
If I turn the key, it sounds like the something is turning and I feel the car move like it is trying to start, but never makes that last click to turn the engine over. (I hope this makes sense).
The starter sounds like it is turning, but thats all I am hearing. I can hold the key in the start position for some time, and something starts to turn, but the engine never cranks.
I checked the alternator and according to the tester at the local auto shop, that is fine. I replaced the battery and starter.
Any ideas on what could be causing this? I also replaced the battery cables because they were worn out.
Thanks in advance for suggestions!
-Lostincamry >> Stay informed about: Just replaced starter on 93 Camry, but still won't turn over |
|
| Back to top |
|
 |  |
External

Since: Jul 20, 2003 Posts: 9
|
(Msg. 2) Posted: Fri Dec 30, 2005 6:55 am
Post subject: Re: Just replaced starter on 93 Camry, but still won't turn [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
"lostincamry" wrote in message
>I just repalced the starter on my 93 Toyota Camry LE. Upon replacing
> it, the car started just fine and would continue to do so for about a
> week. Then one time after having started it earlier that morning, the
> car would not turn over.
>
> If I turn the key, it sounds like the something is turning and I feel
> the car move like it is trying to start, but never makes that last
> click to turn the engine over. (I hope this makes sense).
>
> The starter sounds like it is turning, but thats all I am hearing. I
> can hold the key in the start position for some time, and something
> starts to turn, but the engine never cranks.
>
> I checked the alternator and according to the tester at the local auto
> shop, that is fine. I replaced the battery and starter.
>
> Any ideas on what could be causing this? I also replaced the battery
> cables because they were worn out.
>
> Thanks in advance for suggestions!
>
> -Lostincamry
>
It's usually a loose cable. Here's what I would do.
1. Check every connection, especially to your battery and starter. Remove
each, burnish the ends with a wire brush and reconnect.
2. Get a voltmeter ($5 or $10 at the parts store) and test your battery. If
it reads less than 12 volts, charge it.
3. Start that baby up and drive into the sunset.
jor >> Stay informed about: Just replaced starter on 93 Camry, but still won't turn over |
|
| Back to top |
|
 |  |
| Related Topics: | When should the timing belt be replaced for a Camry? - At what mileage, or how often, should the timing belt for a 2000 Camry CE be changed?
Starter goes rat-ta-ta-ta... but no turn-over - This morning my wife's 2003 Rav4 (60k miles), after no previous symptoms whatsoever, suddenly won't start. The starter makes a rapid, high-pitched ra-ta-ta-ta-ta... sound as long as the key is turned, but seems not to be turning the engine. I've tried ...
Where to find minimal turn radius of Camry V6 99 ? - I have some dispute with insurance company and need this info as a supporting evidence. So if I make a u-turn with the steering wheel turned all the way left, what's the distance between the original path and the final path after u-turn? Assume that..
Heater lukewarm after coolant replaced - I just had the coolant replaced on my 2003 Matrix (33k miles) and I noticed that when I drive my car the heater air is lukewarm for about 3-5 minutes and then abruptly it gets hot. I'm not 100% positive but I think before I had the coolant replaced,..
P0420 comes back after CAT and O2 sensors replaced - Hi, It is raining today, on my way home, the check light turned on and I checked, it reads P0420. I just have CAT and 2 O2 sensors(front adn back) replaced about a month, how come? what possibly went wrong? What should I do next? |
|
You can post new topics in this forum You can reply to topics in this forum You can edit your posts in this forum You can delete your posts in this forum You can vote in polls in this forum
|
|
|
|
 |
|
|