Best way to remove/prevent rust on '97 Suburban

FAQ

Profile

Best way to remove/prevent rust on '97 Suburban

AutoBoardz (Home) -> Chevrolet Forum

Next: What is YOUR take on this PROBLEM? Help!

Author

Message

pwilson3

External

Since: Jul 03, 2006
Posts: 1

(Msg. 1) Posted: Mon Jul 03, 2006 6:55 am Post subject: Best way to remove/prevent rust on '97 Suburban Archived from groups: alt>trucks>chevy (more info?)

I have a white '97 Suburban that is in fantastic shape, however the rear left cargo door is starting to rust in the hinges and also along the bottom inside of the door. What is the recommended method for rust removal/prevention in these locations? While I'm at it, I also have a large tear worn in the leather driver's seat from getting in and out - are there any easy fixes for this? Thanks for any ideas or assistance! >> Stay informed about: Best way to remove/prevent rust on '97 Suburban

Display posts from previous:

Related Topics:

rust in bed of '93 k2500 suburban - I pulled up the carpet in the back of my suburban and found that while most of it was in pretty good shape, there was some rust that was allowing water in. There appear to be two points of concern: There is a cross-member spot-welded to the underside of...

Any truck finishes that are especially rust resistant? - If I buy a new truck, I am planning on keeping it outside (garage space too important to waste on a vehicle). So, rust protection is very important to me. Is there some truck finish that is especially rust resistant? I will definitely use Line-X or som...

Roof Rack Attachment Rust? - 1998 'Burb. I carry a *lot* of stuff up there - including a large rooftop box. http://tinyurl.com/379743 Post-having the front end overhauled - for which I had to remove all that junk so the vehicle would go high enough on the lift without hitting...

1995 3/4 ton 4x4 Suburban SLE - Anyone know of online site for wiring schematic, particularly for Glow Plugs (power to) fuses? 6.5L Diesel engine. Thanks for your help.

89 suburban - i just purchased a 1989 chevy suburban 2500 silverado, when i was inspecting the underside i found a linkage type arm attached to the rear end just hanging, there appears to be some type of valve mounted on the frame close to the arm. does anyone have an...

	AutoBoardz (Home) -> Chevrolet Forum	All times are: Pacific Time (US & Canada)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum