Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

how to hold radiator in place from top of core support

 
   AutoBoardz (Home) -> Volkswagen RSS
Next:  92 jimmy window problem  
Author Message
apollo13plc




Joined: Feb 03, 2008
Posts: 1



(Msg. 1) Posted: Sun Feb 03, 2008 12:15 am
Post subject: how to hold radiator in place from top of core support

1998 Jetta k2
134,5000 miles
5speed

I had recently got into a accident with it. i had to replace the left drive side fender, hood, radiator, ac condensor, and the core support. After i replaced all this i realized that the radiator u can push it back and forth. i have it secured on the bottom but are there screws that are suppose to go into the top of the radiator through the core support in order to stop it from moving if u know it would help alot thx.

 >> Stay informed about: how to hold radiator in place from top of core support 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
A2 heater core - why such a big job if you have A/C? - Hello all, Yesterday I found myself showering in a fine mist of boiled coolant, and today there's a puddle in the footwells. The Bentley manual describes a long but not mind-bending process for removing the dashboard and heater box, and swapping out...

Heater core bypass - My 88 Fox seems to always provide heat inside the car from the heater core. Some days worse that others. Yes, the user temp selector is in the middle field between blue and red. Yes, I tried it all the way to the left in the blue field as well. Thi...

Heater core problem- '92 Golf - I just finished installing a brand new VW heater core on my '92 Golf. I filled the system with new G11, fired it up, and was delighted to have no more leaks and smell of coolant in the passenger compartment. But... a few minutes later I was less delighte...

92 Cabriolet heater core, it's supposed to be easy!?!? - I could really use some insight into this by someone who's done it. The heater core is accessible through a slot in the side of the heater box on the drivers side but it can only come out 4 inches before it runs into the pedal assemblies. I figured....

how to remove the airbag connector-heater core job! - hi. I am replacing the heater core on my 1995 Passat GLX VR6 this weekend. I'll spare you the story since many of you are already familiar with this problem. Two questions. 1. How do you remove the connector on the backside of the steering wheel..
   AutoBoardz (Home) -> Volkswagen All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]