headlight conversion for 98 crv?

Are there any headlight conversion kits for my 98 crv that might improve my
road illumination? And, do I dare install some 80/100 watt H4 bulbs in the
existing headlight assemblies? I am worried about melting down the plastic.
 >> Stay informed about: headlight conversion for 98 crv? 

"B29" <micoder RemoveThis @sbcglobal.net> wrote in
news:Gt1ah.9738$6t.1495@newssvr11.news.prodigy.com:

> Are there any headlight conversion kits for my 98 crv that might
> improve my road illumination? And, do I dare install some 80/100 watt
> H4 bulbs in the existing headlight assemblies? I am worried about
> melting down the plastic.
>
>
>


Don't do it! It's not the reflectors, but the the existing wiring that will
have a hard time of it with the extra current. Honda headlight wiring is
marginal.

If you want to improve your lighting, first make sure the lenses are not
sandblasted and pitted, and that they are aimed correctly. both items will
put light where you don't want it, resulting in less where you do.

Finally, if your bulbs are original, they will have dimmed somewhat from
new. Replacing them with new will help.

Actually, there is one more thing that would help: Installing a set of
European-market lamps. The beam pattern is far better than ours. You can
apparently obtain these at performance shops. If you decide to do this,
make certain they are NOT "JDM" (or right-hand-drive) lamps!.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
 >> Stay informed about: headlight conversion for 98 crv? 

"B29" <micoder RemoveThis @sbcglobal.net> wrote in
news:Gt1ah.9738$6t.1495@newssvr11.news.prodigy.com:

> Are there any headlight conversion kits for my 98 crv that might
> improve my road illumination? And, do I dare install some 80/100 watt
> H4 bulbs in the existing headlight assemblies? I am worried about
> melting down the plastic.
>
>
>


Don't do it! It's not the reflectors, but the the existing wiring that will
have a hard time of it with the extra current. Honda headlight wiring is
marginal.

If you want to improve your lighting, first make sure the lenses are not
sandblasted and pitted, and that they are aimed correctly. both items will
put light where you don't want it, resulting in less where you do.

Finally, if your bulbs are original, they will have dimmed somewhat from
new. Replacing them with new will help.

Actually, there is one more thing that would help: Installing a set of
European-market lamps. The beam pattern is far better than ours. You can
apparently obtain these at performance shops. If you decide to do this,
make certain they are NOT "JDM" (or right-hand-drive) lamps!.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
 >> Stay informed about: headlight conversion for 98 crv? 

"B29" <micoder.TakeThisOut@sbcglobal.net> wrote in
news:Gt1ah.9738$6t.1495@newssvr11.news.prodigy.com:

> Are there any headlight conversion kits for my 98 crv that might
> improve my road illumination? And, do I dare install some 80/100 watt
> H4 bulbs in the existing headlight assemblies? I am worried about
> melting down the plastic.
>
>
>


Don't do it! It's not the reflectors, but the the existing wiring that will
have a hard time of it with the extra current. Honda headlight wiring is
marginal.

If you want to improve your lighting, first make sure the lenses are not
sandblasted and pitted, and that they are aimed correctly. both items will
put light where you don't want it, resulting in less where you do.

Finally, if your bulbs are original, they will have dimmed somewhat from
new. Replacing them with new will help.

Actually, there is one more thing that would help: Installing a set of
European-market lamps. The beam pattern is far better than ours. You can
apparently obtain these at performance shops. If you decide to do this,
make certain they are NOT "JDM" (or right-hand-drive) lamps!.


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
 >> Stay informed about: headlight conversion for 98 crv? 

Thanks for the information. I still am thinking about the large lights. I
will put in a relay to handle the load. I will probably just run them for a
while and see if the plastic starts getting too hot. I sure don't want to
burn up my honda wiring. I'll just run some #12 from my battery to power the
low and high beams.

I did put these headlamps in a ford windstar and they worked fine. They did
not melt the plastic. That of course does not mean that they would not melt
honda plastic.


"Tegger" <tegger DeleteThis @tegger.c0m> wrote in message
news:Xns9886B81D95925tegger@207.14.116.130...
> "B29" <micoder DeleteThis @sbcglobal.net> wrote in
> news:Gt1ah.9738$6t.1495@newssvr11.news.prodigy.com:
>
>> Are there any headlight conversion kits for my 98 crv that might
>> improve my road illumination? And, do I dare install some 80/100 watt
>> H4 bulbs in the existing headlight assemblies? I am worried about
>> melting down the plastic.
>>
>>
>>
>
>
> Don't do it! It's not the reflectors, but the the existing wiring that
> will
> have a hard time of it with the extra current. Honda headlight wiring is
> marginal.
>
> If you want to improve your lighting, first make sure the lenses are not
> sandblasted and pitted, and that they are aimed correctly. both items will
> put light where you don't want it, resulting in less where you do.
>
> Finally, if your bulbs are original, they will have dimmed somewhat from
> new. Replacing them with new will help.
>
> Actually, there is one more thing that would help: Installing a set of
> European-market lamps. The beam pattern is far better than ours. You can
> apparently obtain these at performance shops. If you decide to do this,
> make certain they are NOT "JDM" (or right-hand-drive) lamps!.
>
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
 >> Stay informed about: headlight conversion for 98 crv?