engine light

External Since: Oct 27, 2007 Posts: 1

Can anyone tell me how to reset the check engine light On a 2001
Tiburon... it came on and had a #1 cylinder miss firing code showing
on the meter I borrowed from a friend.....I fixed the problem it was a
bad wire to that cylinder so I replaced all the wires along with the
spark plugs...The car now runs fine but I don't know how to re-set
light....thank you Michael

External Since: Jun 24, 2007 Posts: 7

On Oct 27, 10:26 pm, wrote:
> Can anyone tell me how to reset the check engine light On a 2001
> Tiburon... it came on and had a #1 cylinder miss firing code showing
> on the meter I borrowed from a friend.....I fixed the problem it was a
> bad wire to that cylinder so I replaced all the wires along with the
> spark plugs...The car now runs fine but I don't know how to re-set
> light....thank you Michael

Remove the negative battery cable for a minute or so and then
reconnect it. Or, borrow the code reader again and reset the light
with that.

Cheers,
Lawrence