Welcome to AutoBoardz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

charoit 94

 
   AutoBoardz (Home) -> Mitsubishi RSS
Related Topics:
3000 GT - Hey all, I just got a 3000 GT and was looking for some chatter about these cars. Picked one up because the dealer said it had a rod knock. I've traced it down to a loose bolt in the clutch. Arrgh, and I have to remove the trans to make..

Balance shaft timing on Galant 2.0 SOC engine - I have seen numerous posts about the balance shaft timing issues on this 2.0 engine. I have tried twice now to get the timing right without using the (8 mm rod) to check the shaft position, and I still have a vibration in the..

Colt - Had a 3- door Colt as loan car for a day Thurs. It had only done 1600 miles, but was it noisy. I couldn't get back to the dealer quick enough. A mixture of road noise and what sounded like noisy wheel bearings. I would avoid one of these.

92 Eclipse - I just purchased a nice eclipse for 150 it is a 92. When I say nice I mean the body and the interior is nice. The car however does not start. I was told the car needs clutch. When I went to pick up the title and keys I attempted to start it. When the

95 mits. galant auto 155000mi - hi, as noted here my car would start and stall it does run just keeps was told i need an engine or a valve job. after was checked including test #1 cylinder 200lb. #2 cyl.200lb #3 180lb and #4 180lb...
Next:  Mitsubishi: my 02 lancer service engine soon  
Author Message
chelseaphil




Joined: Apr 13, 2008
Posts: 1



(Msg. 1) Posted: Sun Apr 13, 2008 10:04 am
Post subject: charoit 94 Get Alert

my turbo sprays oil whilst accelerating, how can i stop this?

 >> Stay informed about: charoit 94 
Back to top
Login to vote
Stewart DIBBS

External


Since: May 02, 2005
Posts: 305



(Msg. 2) Posted: Sun Apr 20, 2008 9:29 am
Post subject: Re: chariot 94 Get Alert [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"chelsea" <none.TakeThisOut@000.com> wrote in message
news:1112802_694e85a7f2a7601aea7a5020e45a63fd@0000.com...
> my turbo sprays oil whilst accelerating, how can i stop this?

I presume you have a turbo diesel, not a turbo gas engine... You also don't
say if the oil sprays out on to the engine or radiator, or into the exhaust
(causing lots of smoke)

1. Lets assume its external spray. The turbo has an in and out oil feed
line. Both lines have copper crush washers under the banjo connectors. Take
the banjo bolts out and replace the copper washers. If this does not fix the
spray, then you have to take the turbo off and inspect the impeller bearings
and seals.

2. If the problem is smoke, take the turbo off and replace the impeller
bearings and seals, or get a rebuilt unit.


regards
Stewart DIBBS
www.pixcl.com/lancerproject

 >> Stay informed about: charoit 94 
Back to top
Login to vote
Display posts from previous:   
   AutoBoardz (Home) -> Mitsubishi All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]