Welcome to AutoBoardz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

cavalier guy just woke up 630 horses in 2.2L ecotec

  
   AutoBoardz (Home) -> Rod & Custom RSS
Next:  El Camino Web sites and NG.....Wanted  
Author Message
ranger

External


Since: Sep 30, 2006
Posts: 20



(Msg. 1) Posted: Mon Mar 12, 2007 8:45 pm
Post subject: cavalier guy just woke up 630 horses in 2.2L ecotec
Archived from groups: rec>autos>rod-n-custom (more info?)
this is the cavalier guy who has been discussing some weird ass engine
swaps which people have absolute objection to so I figured WTF I have
heard of them GM boys bringing some big ponies out of this thing so
why don't I give it a shot. The 2.2L ecotec that is. So here I am with
a 2.2L ecotec that I just had it dyno-tested in his shop. If you guys
want to know how I did it I will tell you but I really wanted to know
if someone could suggest where I might be able to find some kind of
manual transmition for it. I have found some automatics but I didn't
really want that. I really want a clutch less manual transmission,
automated manual transmission, e-gear, or paddle shift gearbox type
transmition for accurate times at the strip. Any suggestions?

 >> Stay informed about: cavalier guy just woke up 630 horses in 2.2L ecotec 
Back to top
Login to vote
user

External


Since: Jun 22, 2005
Posts: 105



(Msg. 2) Posted: Thu Mar 22, 2007 4:53 pm
Post subject: Re: cavalier guy just woke up 630 horses in 2.2L ecotec [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
If you got nearly five horsepower-per-cubic-inch (2.2 liters equals
approximately 130 cubic inches)....as you claim.....the NASCAR Nextel Cup
engine shops would be knocking your door down......and you could write your
own ticket!!!

They're on the edge with a little over two-horses-per-cube........

I see there is no clue shop in your town, and you are STILL clueless.

 >> Stay informed about: cavalier guy just woke up 630 horses in 2.2L ecotec 
Back to top
Login to vote
HLS

External


Since: May 10, 2005
Posts: 476



(Msg. 3) Posted: Mon Apr 23, 2007 10:33 am
Post subject: Re: cavalier guy just woke up 630 horses in 2.2L ecotec [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"*" wrote in message

>
>
> If you got nearly five horsepower-per-cubic-inch (2.2 liters equals
> approximately 130 cubic inches)....as you claim.....the NASCAR Nextel Cup
> engine shops would be knocking your door down......and you could write
your
> own ticket!!!
>
> They're on the edge with a little over two-horses-per-cube........
>
> I see there is no clue shop in your town, and you are STILL clueless.

NASCAR is one thing...drag racing is another. It is possible to get
enormous
horsepower out of engines that are not destined to be run in that mode for
hours.

Some of the cars that run on PINKS are apparently capable of 5 HP per cube.
Briefly.
 >> Stay informed about: cavalier guy just woke up 630 horses in 2.2L ecotec 
Back to top
Login to vote
Nate Nagel

External


Since: Nov 03, 2007
Posts: 353



(Msg. 4) Posted: Wed Apr 25, 2007 7:43 pm
Post subject: Re: cavalier guy just woke up 630 horses in 2.2L ecotec [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
HLS DeleteThis @nospam.nix wrote:
> "*" wrote in message
>
>
>>
>>If you got nearly five horsepower-per-cubic-inch (2.2 liters equals
>>approximately 130 cubic inches)....as you claim.....the NASCAR Nextel Cup
>>engine shops would be knocking your door down......and you could write
>
> your
>
>>own ticket!!!
>>
>>They're on the edge with a little over two-horses-per-cube........
>>
>>I see there is no clue shop in your town, and you are STILL clueless.
>
>
> NASCAR is one thing...drag racing is another. It is possible to get
> enormous
> horsepower out of engines that are not destined to be run in that mode for
> hours.
>
> Some of the cars that run on PINKS are apparently capable of 5 HP per cube.
> Briefly.
>

"Only 50 miles on new engine" <G>

nate

(1/4 mile at a time...)


--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel
 >> Stay informed about: cavalier guy just woke up 630 horses in 2.2L ecotec 
Back to top
Login to vote
camaroz396

External


Since: May 10, 2007
Posts: 10



(Msg. 5) Posted: Sat Apr 28, 2007 11:52 am
Post subject: Re: cavalier guy just woke up 630 horses in 2.2L ecotec [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Apr 25, 7:43 pm, Nate Nagel wrote:
> H....TakeThisOut@nospam.nix wrote:
> > "*" wrote in message
> >
>
> >>If you got nearly five horsepower-per-cubic-inch (2.2 liters equals
> >>approximately 130 cubic inches)....as you claim.....the NASCAR Nextel Cup
> >>engine shops would be knocking your door down......and you could write
>
> > your
>
> >>own ticket!!!
>
> >>They're on the edge with a little over two-horses-per-cube........
>
> >>I see there is no clue shop in your town, and you are STILL clueless.
>
> > NASCAR is one thing...drag racing is another. It is possible to get
> > enormous
> > horsepower out of engines that are not destined to be run in that mode for
> > hours.
>
> > Some of the cars that run on PINKS are apparently capable of 5 HP per cube.
> > Briefly.
>
> "Only 50 miles on new engine" <G>
>
> nate
>
> (1/4 mile at a time...)
>
> --
> replace "roosters" with "cox" to reply.http://members.cox.net/njnagel- Hide quoted text -
>
> - Show quoted text -

LOL Some of you have no clue on what it take to make horsepower. I'm
running 1100 hp bigblock gm out of 572 cubic inch
Check this out on the ecotec engine http://tunersource.gmblogs.com/Drag-Racing/ECOtec-Drag-Engine-Specs
 >> Stay informed about: cavalier guy just woke up 630 horses in 2.2L ecotec 
Back to top
Login to vote
HLS

External


Since: May 10, 2005
Posts: 476



(Msg. 6) Posted: Sat May 05, 2007 2:49 am
Post subject: Re: cavalier guy just woke up 630 horses in 2.2L ecotec [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
wrote in message


> LOL Some of you have no clue on what it take to make horsepower. I'm
> running 1100 hp bigblock gm out of 572 cubic inch
> Check this out on the ecotec engine
http://tunersource.gmblogs.com/Drag-Racing/ECOtec-Drag-Engine-Specs

That is just less than 2 HP per cube. So what is your point?
 >> Stay informed about: cavalier guy just woke up 630 horses in 2.2L ecotec 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Car and Deep Cycle Battery FAQ - Hi all, The Car and Deep Cycle Battery FAQ has been updated. The current version is 5.5, dated May 6, 2006 and can be found on www.batteryfaq.org. Answers to Frequently Asked Questions, tips, manufacturer's information, references and hyperlinks are..

Resto and Powder Coat shop - Mid Atlantic - Intro: Atlantic Coatings Inc in Stevensville MD on Kent Island. Large in-house abrasive blast booth - fit your entire vehicle MIG and light TIG Chemical Wash Bay and Degrease Powder Coating - all metals Wheel refinishing and Chrome replacement process..

How to do it yourself - This website has a good webpage that explains how to do auto detailing and more. http://www.ucanfix.com/ in the Autos section under FAQs They also have a free Question and answer section

10 Gift Ideas for your Wife, Daughter, or Girlfriend! - The holiday's can be stressful, but with these gifts, there's no worries! All under $100 - http://www.tallyrally.org - happy holidays!

10 Gift Ideas for your Husband, Wife, Son or Daughter! - The holiday's can be stressful, but with these gifts, there's no worries! All under $100 - http://www.tallyrally.org - happy holidays!
   AutoBoardz (Home) -> Rod & Custom All times are: Pacific Time (US & Canada)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]