They're brake lights, except when they don't work then they're broke lights
but they are never break lights.
The Brake Light Swtich on the pedal goes through the Turn Signal Switch,
then is fed to the brake lights. As a test, apply the brakes and move the
turn signal stalk a little bit to see if you can find a place where the
brake lights come on. If you can do this, the turn signal switch is bad. If
you still can't get the brake lights to come on then the problem can either
be the turn signal switch or a brokne wire between the brake pedal and the
turn signal switch.
You said the Turn Signals work, is that right?
"Choice" <none DeleteThis @000.com> wrote in message
news:1112689_c4ce76f243f6f47f012f02061a916bb7@autoboardz.com...
> Hi, i have a 1987 full size bronco i have running lights flasher back
> up lights hazzards lights but no break lights i have power at the
> break switch on the pedal all fuses r good but still no break lights
> some 1 please help me
>
> --
> Posted at author's request, using fully moderated
> http://www.AutoBoardz.com interface
> Thread archive:
> http://www.AutoBoardz.com/break-lights-wont-work-ftopict235949.html >> Stay informed about: break lights wont work