How do you adjust valves

FAQ

Profile

How do you adjust valves

AutoBoardz 2 (Home) -> GM -> Olds Cutlass Forum

Next: Frozen Door Locks

Author

Message

Weedahoe

External

Since: Nov 28, 2003
Posts: 17

(Msg. 1) Posted: Sun Nov 23, 2003 2:38 pm
Post subject: How do you adjust valves
Archived from groups: alt>autos>gm>olds-cutlass (more info?)

Does anyone know what the proper procedure is for adjusting valves on a set
of heads? I have heard two different ways. One by doing each valve at a time
and the other is by getting the piston to TDC and then setting the valves by
getting zero lash and then preload. Does anyone know which is correct or the
better procedure?

>> Stay informed about: How do you adjust valves

Display posts from previous:

Related Topics:

How to fix pinging? -- SOLVED, additional info - I originally started a thread a while back in regards to a pinging problem in an 86 Cutlass Ciera. I used some suggestions (spraying water thru the carb) which at the time fixed it for a while, but recently the problems came back. Today I did the next..

Turn Signal Problem - I have a 1995 Cutlass Supreme. When operating the left turn signal, it won't automatically reset. Is this an easy fix? The right turn works fine. Thanks for any help. Joe

97 Cutlass Supreme A.C. Question - Hopefully someone can help me on this. My question is this, When I turn on the a/c on my 1997 cutlass supreme all it does is blow out the top and bottom vents, it use to make a "stuttering" sound like the vent door was having a hard time droppi...

daytime running lights - Inlaws have a 95 and the daytime lights stopped working. Low beam light has a tan wire the goes into car at a upper firewall block connector . So if there is only one wire, and no seperate fuse for d-r-l, what controls the lights. I don't know if there i...

tranny swap for a 1980 cutlass supreme - I went down to the junk yard last weekend to get a tranny for a 1980 cutlass supreme they didn't have that year and I was wondering what other years would also work. It occured to me that I might be able to pull the tranny out of a buick regal, chevy..

	AutoBoardz 2 (Home) -> GM -> Olds Cutlass Forum	All times are: Pacific Time (US & Canada)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum