Welcome to AutoBoardz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

HELP....Olds remote lock prgm instructions

 
   AutoBoardz 2 (Home) -> GM -> Olds Cutlass Forum RSS
Next:  Mini Photos  
Author Message
ZZR

External


Since: Apr 15, 2005
Posts: 1



(Msg. 1) Posted: Fri Apr 15, 2005 9:55 am
Post subject: HELP....Olds remote lock prgm instructions
Archived from groups: alt>autos>gm>olds-cutlass (more info?)

I have a 1997 Olds 88 and got a second used remote door unlocker off Ebay.

I tried the system where you take out the radio fuse, turn on/off 3 times
etc. but my door locks/trunk do not cycle to tell me its ready to prgm.

Is there another system to do this year car ? I may have the wrong
instructions ( found them on the net )

Thanks in advance



-NOSPAM

 >> Stay informed about: HELP....Olds remote lock prgm instructions 
Back to top
Login to vote
ZZR

External


Since: Apr 16, 2005
Posts: 1



(Msg. 2) Posted: Sat Apr 16, 2005 5:55 pm
Post subject: found it....Olds remote lock prgm instructions [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

same as Buicks...

1997 to 1999 Buick Lesabres

Important
Before entering the programming mode, verify possession of all the
transmitters you will be using on the vehicle. Once you program the
transmitter, the memory erases. The other transmitters will not be
functional until you program the transmitters again. You may program
up to 4 transmitters.

Perform the following procedure when adding new transmitters or
replacing failed transmitters:

1 Turn the ignition switch OFF.
2 Use a fused jumper wire in order to jumper the DLC terminal 8
(BLK/WHT) to terminal 4 (BLK).
3 Close all of the doors.
4 Turn the ignition switch ON. The doors will cycle to lock.
5 Press and hold the LOCK button and the UNLOCK button on one
transmitter. After a 30 second delay the doors will lock and unlock.

Important
Do not turn the ignition OFF or the first transmitter will become
inoperative.

6 In order to program extra transmitters, repeat step 5.
Disconnect the fused jumper wire from the DLC.

 >> Stay informed about: HELP....Olds remote lock prgm instructions 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Olds project - Know i rebuild a 73's Olds,Do you whant to talk whit me?

Olds 442 tranny help - I have a 1987 Olds 442 that I am re-working. I have taken the 307 out and replaced it with a modified 350. Because I am running a cam with a little over 500 on the lift and 3.73 rear gears so I will be using a stall convertor at about 2600-2800. I am..

1988 Olds Cutlass Calais - The car stalls sometimes when i put it into gear and press the gass pedal. If i catch it soon enough and let off the accelerator it usually won't stall. ANy ideas what is causing the problem?

Where did they hide my PCV valve ? 97 Olds - I have a 1997 Olds 88 with the standard 3.8 V6 motor. Been looking all over for my PCV so I can replace it. Took off the plastic cover over the plug wires, must be blind to miss it. Can anyone lead me to it ? TIA Tree

FS - 1969 Olds Cutlass S Convertible - *sigh* Due to time and monies, I can no longer keep my "baby". A 1969 Olds Cutlass S convertible in the middle of restoration. Entire body work frame up done. Needs engine work, new top. Has power top with glass window, A/C, power windows,...
   AutoBoardz 2 (Home) -> GM -> Olds Cutlass Forum All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]