Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Engine surge update

  
   AutoBoardz 2 (Home) -> Mitsubishi RSS
Next:  Power seat motor problem??  
Author Message
branigan

External


Since: Jul 04, 2005
Posts: 3



(Msg. 1) Posted: Sun Jul 17, 2005 12:55 pm
Post subject: Engine surge update
Archived from groups: alt>autos>mitsubishi (more info?)
I replace my EGR valve, due to a CEL and reading the code. I also remove the
TB and opened a door after removing two screws. I noticed that one of the
gears inside had some teeth missing. Could anyone tell me what that is for
and could it contribute to the idle surge. The gear was black and behind a
white gear. thx for the help...

 >> Stay informed about: Engine surge update 
Back to top
Login to vote
Stewart DIBBS

External


Since: May 02, 2005
Posts: 39



(Msg. 2) Posted: Sun Jul 17, 2005 5:28 pm
Post subject: Re: Engine surge update [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"branigan" <lgovedi1 RemoveThis @tbayDawtRR.Dawt.com> wrote in message
news:CyvCe.6861$iG6.5306@tornado.tampabay.rr.com...
>I replace my EGR valve, due to a CEL and reading the code. I also remove
>the
> TB and opened a door after removing two screws. I noticed that one of the
> gears inside had some teeth missing.

Air idle control motor, and thats your problem, in part. The idle control
valve is probably full of carbon. Gears are of course not available spares,
only the complete throttle body. Look for a good throttle body at a wrecker.
Take the cover place off in the presence of the wrecker to verify the state
of the gears, before you hand over your money.

Stewart DIBBS

 >> Stay informed about: Engine surge update 
Back to top
Login to vote
simpleton

External


Since: May 10, 2005
Posts: 32



(Msg. 3) Posted: Sun Jul 17, 2005 6:52 pm
Post subject: Re: Engine surge update [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Them stepper motors are all over ebay, some at pretty reasonable prices...


"Stewart DIBBS" <sjd.DeleteThis@pixcl.com> wrote in message
news:3fedneu-OpznUEffRVn-hg@magma.ca...
>
> "branigan" <lgovedi1.DeleteThis@tbayDawtRR.Dawt.com> wrote in message
> news:CyvCe.6861$iG6.5306@tornado.tampabay.rr.com...
>>I replace my EGR valve, due to a CEL and reading the code. I also remove
>>the
>> TB and opened a door after removing two screws. I noticed that one of the
>> gears inside had some teeth missing.
>
> Air idle control motor, and thats your problem, in part. The idle control
> valve is probably full of carbon. Gears are of course not available
> spares, only the complete throttle body. Look for a good throttle body at
> a wrecker. Take the cover place off in the presence of the wrecker to
> verify the state of the gears, before you hand over your money.
>
> Stewart DIBBS
>
 >> Stay informed about: Engine surge update 
Back to top
Login to vote
branigan

External


Since: Jun 21, 2005
Posts: 2



(Msg. 4) Posted: Mon Jul 18, 2005 6:42 am
Post subject: Re: Engine surge update [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
What are the stepper motors listed as? mirage TB stepper motor?

On Sun, 17 Jul 2005 18:52:09 -0400, "simpleton" <simpleton DeleteThis @yahoo.net>
wrote:

>Them stepper motors are all over ebay, some at pretty reasonable prices...
>
>
>"Stewart DIBBS" <sjd DeleteThis @pixcl.com> wrote in message
>news:3fedneu-OpznUEffRVn-hg@magma.ca...
>>
>> "branigan" <lgovedi1 DeleteThis @tbayDawtRR.Dawt.com> wrote in message
>> news:CyvCe.6861$iG6.5306@tornado.tampabay.rr.com...
>>>I replace my EGR valve, due to a CEL and reading the code. I also remove
>>>the
>>> TB and opened a door after removing two screws. I noticed that one of the
>>> gears inside had some teeth missing.
>>
>> Air idle control motor, and thats your problem, in part. The idle control
>> valve is probably full of carbon. Gears are of course not available
>> spares, only the complete throttle body. Look for a good throttle body at
>> a wrecker. Take the cover place off in the presence of the wrecker to
>> verify the state of the gears, before you hand over your money.
>>
>> Stewart DIBBS
>>
>
 >> Stay informed about: Engine surge update 
Back to top
Login to vote
Display posts from previous:   
   AutoBoardz 2 (Home) -> Mitsubishi All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]