adding trans oil on MDX

External Since: May 12, 2007 Posts: 4

Hi All,

I installed the trans oil cooler on my MDX, and thought to check the
trans fluid after. It was near the bottom of the range, however it is a
small range and it drives fine. I thought to add a little fluid just to
top it off, and checking the manual it indicates you need to take it to
the dealer.

Does anyone know the best procedure for adding trans fluid to the 3.5L
A/T MDX other than adding it through the dipstick passage?

Thanks, Dave

External Since: Oct 24, 2006 Posts: 626

David Henschel wrote:
> Hi All,
>
> I installed the trans oil cooler on my MDX, and thought to check the
> trans fluid after. It was near the bottom of the range, however it is a
> small range and it drives fine. I thought to add a little fluid just to
> top it off, and checking the manual it indicates you need to take it to
> the dealer.
>
> Does anyone know the best procedure for adding trans fluid to the 3.5L
> A/T MDX other than adding it through the dipstick passage?
>
> Thanks, Dave

--------------------------------

I'd leave it for a few months and then check again. The difference
between LOW and FULL is only a few ounces.

'Curly'