|
Next: Information for companies
|
| Author |
Message |
External
Since: Mar 11, 2008
Posts: 6
|
(Msg. 1) Posted: Tue Mar 11, 2008 2:26 am
Post subject: Wram Motor Won't Start
Archived from groups: alt>autos>dodge (more info?)
|
|
|
2005 Dodge Stratus 2.4 4 cyl. Auto Trans
Sometimes, if you turn off the motor after it reaches running temperature,
it won't start until you let it set about 15-30 mins. (Starter spins motor,
no fire at plugs) It will start after that. Sometimes it runs rough after
it restarts, sometime it runs find. Sometime the "Check Engine Light" comes
on after it restarts, sometimes the light does not. Sometimes the "Check
Engine Light" flashes. Please tell me what you think could be the
problem.... Thanks! |
|
| Back to top |
|
 | |
External
Since: Nov 22, 2004
Posts: 254
|
(Msg. 2) Posted: Tue Mar 11, 2008 6:22 am
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Mar 11, 2008
Posts: 6
|
(Msg. 3) Posted: Tue Mar 11, 2008 10:57 pm
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"damnnickname" <damnnickname RemoveThis @yahoo.com> wrote in
news:e1d99a11981f41ee0769ee8e84c29372@localhost.talkaboutautos.com:
> The first thing to do is find out what fault code is stored in the memory
> of the computer.
>
> Glenn Beasley
> Chrysler Tech
O.K. I got a Code PO335 >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Dec 03, 2004
Posts: 1464
|
(Msg. 4) Posted: Tue Mar 11, 2008 10:57 pm
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Bruce" <dg_brousard RemoveThis @yahoo.com> wrote in message
news:Xns9A5EC0CAE3DF8dgbrousardyahoocom@216.168.3.70...
> "damnnickname" <damnnickname RemoveThis @yahoo.com> wrote in
> news:e1d99a11981f41ee0769ee8e84c29372@localhost.talkaboutautos.com:
>
> > The first thing to do is find out what fault code is stored in the
memory
> > of the computer.
> >
> > Glenn Beasley
> > Chrysler Tech
>
>
>
> O.K. I got a Code PO335
You have a crankshaft position sensor fault, The sensor could be bad or a
number of other things from a shorted or open 5 volt supply from the PCM .
Crank signal open or shorted. Faulty ground and so on. If you just wanted to
take a pot shot at it, replace the crank sensor
Glenn >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Mar 11, 2008
Posts: 6
|
(Msg. 5) Posted: Wed Mar 12, 2008 12:31 am
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Dec 03, 2004
Posts: 1464
|
(Msg. 6) Posted: Wed Mar 12, 2008 12:31 am
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Bruce" <dg_brousard.DeleteThis@yahoo.com> wrote in message
news:Xns9A5ED0D2E5904dgbrousardyahoocom@216.168.3.70...
>
>
> Thank you very much for your help!!
Let me know what you find >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Mar 11, 2008
Posts: 6
|
(Msg. 7) Posted: Sat Mar 15, 2008 12:54 am
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"maxpower" <damnnickname.DeleteThis@yahoo.com> wrote in
news:U9Cdna49eJYgu0ranZ2dnUVZ_vOlnZ2d@comcast.com:
>
> "Bruce" <dg_brousard.DeleteThis@yahoo.com> wrote in message
> news:Xns9A5ED0D2E5904dgbrousardyahoocom@216.168.3.70...
>>
>>
>> Thank you very much for your help!!
>
> Let me know what you find
>
>
Got part, Dealer said Crank positioned senor was behind the power steering
pump on the right side of motor, and I would have to pull power steering
pump bracket. It took 2 hours to remove the pump and bracket, and the upper
and lower plastic cover over the cam shaft belt. Could not find Crank
positioned senor! Called a local garage, and was told the senor was on
other side of motor, over the starter! It was there! Put part in, Started
fine, Ran OK for 5 miles, then it cut off the Cruise Control by its self
and motor started cutting out (Missing). I will try to get a new error code
soon. Any Ideas? >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Oct 10, 2004
Posts: 716
|
(Msg. 8) Posted: Sun Mar 16, 2008 7:43 am
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
maxpower wrote:
> You have a crankshaft position sensor fault, The sensor could be bad or a
> number of other things from a shorted or open 5 volt supply from the PCM .
> Crank signal open or shorted. Faulty ground and so on. If you just wanted to
> take a pot shot at it, replace the crank sensor
Hope it's not like on my 1993 Nissan Altima. The crank sensor was part
of the distributor and had to be replaced along with it. $500 for the
distributor plus labor. The distributor seal had leaked allowing oil
into the sensor. Where is the sensor in most late model Dodges or does
it vary widely with different engines? >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Dec 03, 2004
Posts: 1464
|
(Msg. 9) Posted: Sun Mar 16, 2008 10:52 am
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"miles" <nope RemoveThis @nopers.com> wrote in message
news:gmaDj.5982$GW5.1828@newsfe12.phx...
> maxpower wrote:
>
> > You have a crankshaft position sensor fault, The sensor could be bad or
a
> > number of other things from a shorted or open 5 volt supply from the PCM
..
> > Crank signal open or shorted. Faulty ground and so on. If you just
wanted to
> > take a pot shot at it, replace the crank sensor
>
> Hope it's not like on my 1993 Nissan Altima. The crank sensor was part
> of the distributor and had to be replaced along with it. $500 for the
> distributor plus labor. The distributor seal had leaked allowing oil
> into the sensor. Where is the sensor in most late model Dodges or does
> it vary widely with different engines?
Depending on the engine application depends on where the crank sensor is
located. Your lucky with you Nissan to get away with just a $500
distributor. The 2.5 Mitsubishi engine's( used on some later model Chrysler)
distributor will run about $1300.00 for the part plus labor
Glenn Beasley
Chrysler Tech >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Mar 11, 2008
Posts: 6
|
(Msg. 10) Posted: Mon Mar 17, 2008 8:15 pm
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"maxpower" <damnnickname.TakeThisOut@yahoo.com> wrote in
news:GISdnd3JDMXdqEDanZ2dnUVZ_gmdnZ2d@comcast.com:
>
> "miles" <nope.TakeThisOut@nopers.com> wrote in message
> news:gmaDj.5982$GW5.1828@newsfe12.phx...
>> maxpower wrote:
>>
>
> Depending on the engine application depends on where the crank sensor
> is located. Your lucky with you Nissan to get away with just a $500
> distributor. The 2.5 Mitsubishi engine's( used on some later model
> Chrysler) distributor will run about $1300.00 for the part plus labor
>
> Glenn Beasley
> Chrysler Tech
>
>
It's a 4 door, I'm now getting an error code 0300 Could it be the spark
plug wires? They look good and the problems comes and goes. It's starting
fine now, just starts missing while driving.
Thanks for your help
Bruce >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Mar 11, 2008
Posts: 6
|
(Msg. 11) Posted: Thu Apr 17, 2008 7:49 pm
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"maxpower" <damnnickname DeleteThis @yahoo.com> wrote in
news:U9Cdna49eJYgu0ranZ2dnUVZ_vOlnZ2d@comcast.com:
>
> "Bruce" <dg_brousard DeleteThis @yahoo.com> wrote in message
> news:Xns9A5ED0D2E5904dgbrousardyahoocom@216.168.3.70...
>>
>>
>> Thank you very much for your help!!
>
> Let me know what you find
>
>
It was the computer, it was replaced under warranty, car running fine now.
Thank you very much for your help!!
Bruce >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
External
Since: Dec 03, 2004
Posts: 1464
|
(Msg. 12) Posted: Fri Apr 18, 2008 4:06 pm
Post subject: Re: Wram Motor Won't Start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Bruce" <dg_brousard.DeleteThis@yahoo.com> wrote in message
news:Xns9A83D3C7FB8BDdgbrousardyahoocom@216.168.3.70...
> "maxpower" <damnnickname.DeleteThis@yahoo.com> wrote in
> news:U9Cdna49eJYgu0ranZ2dnUVZ_vOlnZ2d@comcast.com:
>
> >
> > "Bruce" <dg_brousard.DeleteThis@yahoo.com> wrote in message
> > news:Xns9A5ED0D2E5904dgbrousardyahoocom@216.168.3.70...
> >>
> >>
> >> Thank you very much for your help!!
> >
> > Let me know what you find
> >
> >
>
> It was the computer, it was replaced under warranty, car running fine now.
>
> Thank you very much for your help!!
> Bruce
Cool >> Stay informed about: Wram Motor Won't Start |
|
| Back to top |
|
| |
FAQ
Profile
Private Messages
Log in
