Welcome to AutoBoardz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Remove Crankshaft Pulley 1990 Loyale

  
   AutoBoardz (Home) -> Subaru RSS
Related Topics:
timing 92 loyale 1.8 - I just replaced the timing belts on our 92 Loyale 1.8 had a few problems but got it done. When the car died the first thing I did was pull the cap because I had a problem with the screw coming out of the rotor once before so I thought that..

LOYALE SAFETY - Hi- I am looking into buying a 1993 loyale, and I was wondering how they hold up in a crash. Thanks for your help.

1991 Loyale CHECK ENGINE light - Hello, I have a 1990 loyale with about 165,000 miles on it. The other day the check engine light came on, and has stayed on ever since. The oil pressure is good, and the is good. Can anyone tell me what else could cause this light to..

1990 Subaru Loyale Wagon Spark Problems - Car died while driving. Power in battery, engine turns over, new, starter moving. pulled into shop and got no spark tested ignition coils, replaced coils and high tension wire. Still, no spark. So no going to the coils, when I get..

crank pulley torque - wrong in books? - Hi all Got the Impreza engine all back together and was just triple checking what I have done - it will be going back in tomorrow if all goes well. Just read a post that states that the crank pulley is supposed to be tightened to over 100 ft/lb and that
Next:  ba falcon brake question  
Author Message
issjoe

External


Since: May 16, 2008
Posts: 12



(Msg. 1) Posted: Sat May 17, 2008 4:26 pm
Post subject: Remove Crankshaft Pulley 1990 Loyale Add to elertz
Archived from groups: alt>autos>subaru (more info?)
1990 Loyale 1.8 automatic.

I need to get crankshaft pulley off to remove middle timing belt
cover. Which way does bolt turn to loosen ?

 >> Stay informed about: Remove Crankshaft Pulley 1990 Loyale 
Back to top
Login to vote
issjoe

External


Since: May 16, 2008
Posts: 12



(Msg. 2) Posted: Sat May 17, 2008 6:53 pm
Post subject: Re: Remove Crankshaft Pulley 1990 Loyale Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On May 17, 6:34 pm, "Kim W" <kwhis....RemoveThis@optusnot.com.au> wrote:
> Counter-clockwise. Lock the crankshaft with a pin through the flywheel at
> the back of the engine block. It can also be done by cranking the engine
> against a fixed spanner on the pulley nut - great care required with this
> method!
>
> "issjoe" <iss....RemoveThis@gmail.com> wrote in message
>
> news:d47423b2-01e3-43ec-a4ef-b911e9bef2e3@u36g2000prf.googlegroups.com...
>
>
>
> > 1990 Loyale 1.8 automatic.
>
> > I need to get crankshaft pulley off to remove middle timing belt
> > cover. Which way does bolt turn to loosen ?- Hide quoted text -
>
> - Show quoted text -

There is a "window" in the top of the bellhousing where you can see
the timing marks. The are small shallow areas on the clutch housing ,
but I havn''t seen any area where I could safely.put a pin. Whats the
area your refering too?

 >> Stay informed about: Remove Crankshaft Pulley 1990 Loyale 
Back to top
Login to vote
issjoe

External


Since: May 16, 2008
Posts: 12



(Msg. 3) Posted: Sat May 17, 2008 7:17 pm
Post subject: Re: Remove Crankshaft Pulley 1990 Loyale Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On May 17, 6:53 pm, issjoe <iss....DeleteThis@gmail.com> wrote:
> On May 17, 6:34 pm, "Kim W" <kwhis....DeleteThis@optusnot.com.au> wrote:
>
>
>
>
>
> > Counter-clockwise. Lock the crankshaft with a pin through the flywheel at
> > the back of the engine block. It can also be done by cranking the engine
> > against a fixed spanner on the pulley nut - great care required with this
> > method!
>
> > "issjoe" <iss....DeleteThis@gmail.com> wrote in message
>
> >news:d47423b2-01e3-43ec-a4ef-b911e9bef2e3@u36g2000prf.googlegroups.com...
>
> > > 1990 Loyale 1.8 automatic.
>
> > > I need to get crankshaft pulley off to remove middle timing belt
> > > cover. Which way does bolt turn to loosen ?- Hide quoted text -
>
> > - Show quoted text -
>
> There is a  "window" in the top of the bellhousing where you can see
> the timing marks. The are small shallow areas on the clutch housing ,
> but I havn''t seen any area where I could safely.put a pin. Whats the
> area your refering too?- Hide quoted text -
>
> - Show quoted text -

I meant to say drive plate, not clutch plate. My Loyale is an
automatic trans.
 >> Stay informed about: Remove Crankshaft Pulley 1990 Loyale 
Back to top
Login to vote
Kim W

External


Since: Sep 25, 2007
Posts: 5



(Msg. 4) Posted: Sun May 18, 2008 5:26 am
Post subject: Re: Remove Crankshaft Pulley 1990 Loyale Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Counter-clockwise. Lock the crankshaft with a pin through the flywheel at
the back of the engine block. It can also be done by cranking the engine
against a fixed spanner on the pulley nut - great care required with this
method!

"issjoe" <issjoe.TakeThisOut@gmail.com> wrote in message
news:d47423b2-01e3-43ec-a4ef-b911e9bef2e3@u36g2000prf.googlegroups.com...
> 1990 Loyale 1.8 automatic.
>
> I need to get crankshaft pulley off to remove middle timing belt
> cover. Which way does bolt turn to loosen ?
 >> Stay informed about: Remove Crankshaft Pulley 1990 Loyale 
Back to top
Login to vote
Kim W

External


Since: Sep 25, 2007
Posts: 5



(Msg. 5) Posted: Tue May 20, 2008 5:22 pm
Post subject: Re: Remove Crankshaft Pulley 1990 Loyale Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
The manual version I worked on had some holes that you could insert a drill
bit into. Have you tried rotating the engine while viewing throught the
window?


"issjoe" <issjoe RemoveThis @gmail.com> wrote in message
news:d47423b2-01e3-43ec-a4ef-b911e9bef2e3@u36g2000prf.googlegroups.com...
> 1990 Loyale 1.8 automatic.
>
> I need to get crankshaft pulley off to remove middle timing belt
> cover. Which way does bolt turn to loosen ?
 >> Stay informed about: Remove Crankshaft Pulley 1990 Loyale 
Back to top
Login to vote
Display posts from previous:   
   AutoBoardz (Home) -> Subaru All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]