The Passenger Seat

http://Toyota.autoboardz.com/Type-Nav-System-ftopict208755.html (X Type Nav System)
I have a 2006 X type with Navigation system. on a sunny day the driver can not see the screen due to the reflection from the passenger seat. Does anyone else have this problem? Any ideas on how to correct it? At night or on cloudy days it is OK. --
« Are aware that you can manually increase/decrease the screen brightness to compensate for day/night preferences? »
« I have not experienced that. Is your interior seat covering light, mine is charcoal grey? You can change the screen brightness via the menu button on the right and then the brightness menu. »
« Paste a picture of Alfred E Newman over the screen to remind yourself that these devices are for morons. »
« So how does it work for *you*? Moron. -- C.R. Krieger (In one of THOSE moods today) »

http://Toyota.autoboardz.com/240d-seats-ftopict214355.html (240d seats question)
I have a '79 mb 240d. The driver seat is sagging, and needs to be worked on. The passenger seat is quite firm and high. Can I easily replace the driver seat with the passenger seat? and how? j.
« For some definition of "easily" - yes, they do swap. You "just" unbolt them. -- Need Mercedes parts? Richard Sexton | Mercedes stuff: 1970 280SE, 72 280SE | Home pages: 633CSi 250SE/C.. »
« You need to just swap the seat bottoms, NOT the whole seat. You will not be able to click your seat belts!! The buckles bolt onto the inside of the frame. »

http://Toyota.autoboardz.com/1997-E420-Passenger-seat-stuck-full-recline-position-ftopict220853.html (1997 E420 Passenger seat stuck in full recline position.....)
Hi All, I am continuing to have glitches with my 1997 E420 Mercedes Benz. I recently positioned the passenger seat in the full recline position so I could carry a long load home from Lowes. The trip went well and I felt smug about using a MBz for hauling. Well, the seat will NOT reposition it s..
« shouldn't have tried to haul that compact dishwasher in your Benz. :- D fortunately, the seat comes out with relative ease. there are two bolts at the front of each rail. in the rear, you may nee.. »
« Wait! You ain't seen nothing yet! Have the front suspension spring mounts rusted off yet? You'll get a thrill when the front suspension suddenly collapses! Has the under hood wire harness frie.. »
« Have you tried to assist the seat back upward as someone triggers the switch? Seat motor can only have so much power to move the seat up... especially if you somehow jammed it. »
« Hi All, Thanks for the feedback. Thanks to Raymond, Rob, Tiger. I finally knuckled under and took the car to the mechanic I use. I watched him as he investigated the problem step by step. He pulle.. »

http://Toyota.autoboardz.com/1987-325-Vibration-Transmision-replacement-ftopict232395.html (1987 325 is - Vibration after Transmision replacement)
Hey Folks, I just had my automatic transmission replaced. At about 20-25 MPR a loud vibration starts between the center console and the passenger seat. At first I thought it was something in the passenger door, now I'm pretty sure it's not. It's hard to tell from the drivers seat. The vibration so..
« It sounds like your mechanic seperated the driveshaft while it was out and didn't put it back together in the correct orientation. Doing so can put it out of balance causing vibration. A driveshaf.. »
« Were you billed for a new guibo? It might have been a good idea just to replace it when he was in there. Another possibility is that the driveshaft was not reassembled with everything lined up perf.. »
« I agree, the first thing that springs to mind would be the propshaft. Although, I would have expected more of a vibration at around 60MPH (100KM). Of course, without hearing/feeling the noise, it's.. »
« Thanks so much for the feedback. looks like it was driveshaft calibration. Problem easily solved!! »