Matrix for 205 52 reg

try camberley autos. or g,f,s. euro parts.you must have a motor factors
near you that can help?
 >> Stay informed about: Matrix for 205 52 reg 

Any idea of prices
"Chrs" <chris.RemoveThis@orbsrealm.com> wrote in message
news:20080107182703.2f5f7d37@compaq...
> try camberley autos. or g,f,s. euro parts.you must have a motor factors
> near you that can help?
 >> Stay informed about: Matrix for 205 52 reg 

Looks like I am going to have to change the heater.
Any advise on how its done.

"brenda" <brendabenda.TakeThisOut@ntlworld.com> wrote in message
news:vNugj.36167$yZ4.4541@newsfe4-gui.ntli.net...
> Any idea of prices
> "Chrs" <chris.TakeThisOut@orbsrealm.com> wrote in message
> news:20080107182703.2f5f7d37@compaq...
> > try camberley autos. or g,f,s. euro parts.you must have a motor factors
> > near you that can help?
>
>
 >> Stay informed about: Matrix for 205 52 reg 

yes glove box out and its all done from the pass side foot well. and it
is a sod of a job to do. when i did one we had to remove the steering
wheel so we could lift the dash up a little bit. so take your time .
 >> Stay informed about: Matrix for 205 52 reg 

Chris tell me more.
I take the glove compartment out and go from there.
Do I only need the heater matrix as they call it

"Chrs" <chris DeleteThis @orbsrealm.com> wrote in message
news:20080108211018.690d1b2d@compaq...
> yes glove box out and its all done from the pass side foot well. and it
> is a sod of a job to do. when i did one we had to remove the steering
> wheel so we could lift the dash up a little bit. so take your time .
 >> Stay informed about: Matrix for 205 52 reg 

On a 405 a couple of years ago it was about £50 from Peugeot.
Are you sure it is the matrix and not just o-rings?
If a 205 is like a 405 the clamp from the matrix to the feed pipes was
only one screw.
If a 205 is like a 405 (I don't know) you can clamp the rubber hoses the
engine side of the bulkhead to save draining the whole system.
Cheers


brenda wrote:
> Chris tell me more.
> I take the glove compartment out and go from there.
> Do I only need the heater matrix as they call it
>
> "Chrs" <chris.TakeThisOut@orbsrealm.com> wrote in message
> news:20080108211018.690d1b2d@compaq...
>> yes glove box out and its all done from the pass side foot well. and it
>> is a sod of a job to do. when i did one we had to remove the steering
>> wheel so we could lift the dash up a little bit. so take your time .
>
>
 >> Stay informed about: Matrix for 205 52 reg 

Where are the o rings
"Wichita" <wichitaka DeleteThis @yahoo.com> wrote in message
news:478485b6$0$8412$db0fefd9@news.zen.co.uk...
> On a 405 a couple of years ago it was about £50 from Peugeot.
> Are you sure it is the matrix and not just o-rings?
> If a 205 is like a 405 the clamp from the matrix to the feed pipes was
> only one screw.
> If a 205 is like a 405 (I don't know) you can clamp the rubber hoses the
> engine side of the bulkhead to save draining the whole system.
> Cheers
>
>
> brenda wrote:
> > Chris tell me more.
> > I take the glove compartment out and go from there.
> > Do I only need the heater matrix as they call it
> >
> > "Chrs" <chris DeleteThis @orbsrealm.com> wrote in message
> > news:20080108211018.690d1b2d@compaq...
> >> yes glove box out and its all done from the pass side foot well. and it
> >> is a sod of a job to do. when i did one we had to remove the steering
> >> wheel so we could lift the dash up a little bit. so take your time .
> >
> >
 >> Stay informed about: Matrix for 205 52 reg 

At the start of the pipes which go into the bulkhead into the matrix.
 >> Stay informed about: Matrix for 205 52 reg 

Are you looseing a lot of water from it ?? you might be able to plug it
with some rad weld.untill the warmer weather gets here.
 >> Stay informed about: Matrix for 205 52 reg