Lancer heels

Unless you can get them dirt cheap look elsewhere. Mitsu was subject to a
class-action suit over their low quality wheels in recent years. Also the
6.5" wheel width is less than optimum.
 >> Stay informed about: Lancer heels 

Also in some Mitsubishi's, the well on some were different, the 5 stud JJ
5.5, JJ6 and JJ6.5 are ok on the rear wheels but hit the chassis on the
front, spacers here in Australia are also illegal, so before you drive,
affix the new rims with tyres on a jack and turn the steering wheel to full
left hand lock then right hand lock. Then reverse the car using the left and
right full locks. Some hit some dont. Hope this helps. Most of the early 4
stud mags fit most 4 stud, i also believe, some Kia rims using 205/65R x 15
5 stud will also fit Mitsubishi's.

Peter
Australia


"Detailing Dude" <cecil DeleteThis @pdisteel.biz> wrote in message
news:bzRng.43301$fG3.39744@dukeread09...
> Will wheels from an Evolution fit a stock Lancer ES without a problem. I'd
> like to dress my simple little Lancer up a bit and thought I'd keep it "in
> the family".
> Don't want to go all out, just rims and window tinting will do it.
>
> Cecil
>
>
 >> Stay informed about: Lancer heels