Welcome to AutoBoardz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

LED Strip Needed

 
   AutoBoardz (Home) -> Rod & Custom RSS
Next:  oil consumption  
Author Message
chudwuh

External


Since: May 18, 2005
Posts: 3



(Msg. 1) Posted: Wed Sep 07, 2005 8:55 am
Post subject: LED Strip Needed
Archived from groups: alt>autos>rod-n-custom (more info?)

Anybody know where I can get a red surface-mount LED strip? It needs
to be a foot long with two mounting studs seven inches between centers
- width is flexible but probably shouldn't be more than an inch. It
needs to be sealed for exterior use. The plan is to use it as a third
brake light on my '38 Plymouth coupe (with 12V system) by bolting it
through the top holes of the license plate, which is mounted in the
stock location on the trunk lid. I know license frames with built-in
lights are available but they're pretty expensive - hopefully the LED
will be cheaper if I can find one with the right dimensions. Thanks
for any help.

 >> Stay informed about: LED Strip Needed 
Back to top
Login to vote
user

External


Since: Jun 22, 2005
Posts: 105



(Msg. 2) Posted: Fri Sep 09, 2005 9:33 am
Post subject: Re: LED Strip Needed [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

I would stroll through some late model junkyards.

Several cars and SUVs have LED high-mount brake lights that might be
adaptable.



wrote in article
...
> Anybody know where I can get a red surface-mount LED strip? It needs
> to be a foot long with two mounting studs seven inches between centers
> - width is flexible but probably shouldn't be more than an inch. It
> needs to be sealed for exterior use. The plan is to use it as a third
> brake light on my '38 Plymouth coupe (with 12V system) by bolting it
> through the top holes of the license plate, which is mounted in the
> stock location on the trunk lid. I know license frames with built-in
> lights are available but they're pretty expensive - hopefully the LED
> will be cheaper if I can find one with the right dimensions. Thanks
> for any help.
>
>

 >> Stay informed about: LED Strip Needed 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
4.3 gm distributer help needed - I know this is a rod-n-custom group but thought one of you people could help. I have 1991 gm 4.3 gm with a holley 4 bbl.on it.It has a distributer less set up.a ecm with a coil pack mounded on top and a timing sensor on bellow housing.The ecm has..

HELP Needed with Sandblast Media - I keep getting wet sand from Homepot and my local nursery. Does anyone know where where I can get dry media for my gravity sandblaster in DALLAS? Thanks, Terry

'37 Chevy advice needed - Ive got the body off the frame today, and am about to order a TCI hub to hub IFS kit. I plan to install a chevy 350 (TBI) and 700-R although I havn't scored them yet. I am interested in the pros and cons of mounting the Master Cylinder on the firewall o...

rochester carb needed - I am looking for a gm250 165hp straight six carb. it is a 1bbl and the year must be around 1975. the motor is in a boat but it is a gm truck motor. nothing around here that is worth using. sonofadocker

37 ford fender information needed - This might sound nutty. I am building a 37 chevy chopped top 2 door sedan and I want to put 37 ford headlights on it. I have a pair of 37 ford headlight buckets and short of finding a 37 ford fender I need to find someplace that would have drawings and...
   AutoBoardz (Home) -> Rod & Custom All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]