Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Interchange info needed 82-92 camaro doors

 
   AutoBoardz (Home) -> GM RSS
Next:  Instrument Panel will not light up for a GMC.  
Author Message
Chevrolet

External


Since: Jan 03, 2008
Posts: 17



(Msg. 1) Posted: Sat Jan 12, 2008 7:04 pm
Post subject: Interchange info needed 82-92 camaro doors
Archived from groups: alt>autos>gm (more info?)

I have bought doors to replace my rusted out berlinetta doors.. A friend
of mine thinks the 92 iroc doors won't work on my 86 berlinetta car ?.. Is
this true ?. I hope not as I spen over $400 on these rust free doors
assuming they would interchange 82-92 as the ad also stated this.

 >> Stay informed about: Interchange info needed 82-92 camaro doors 
Back to top
Login to vote
Steve W.

External


Since: Oct 30, 2007
Posts: 190



(Msg. 2) Posted: Sat Jan 12, 2008 9:50 pm
Post subject: Re: Interchange info needed 82-92 camaro doors [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Chevrolet wrote:
> I have bought doors to replace my rusted out berlinetta doors.. A friend
> of mine thinks the 92 iroc doors won't work on my 86 berlinetta car ?.. Is
> this true ?. I hope not as I spen over $400 on these rust free doors
> assuming they would interchange 82-92 as the ad also stated this.
>
>

My crash book says they should fit. So does my Hollander listing. The
ground effects will be different though.

--
Steve W.
Near Cooperstown, New York

 >> Stay informed about: Interchange info needed 82-92 camaro doors 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
i have a 1986 camaro - i have a 1986 camaro with a 305 and a 1968 chevelle with a 307 i need to know if the 305 manifold and heads will work on the 307

i'm stumped on my 85 2.6l camaro... - the car bogs, doesn't accelrate properly backfires then goes like a bastard...you tromp it, it kicks down right away and goes....you try and go 40 and you're going 30 and gets pretty loud like it wants to shift and finally does and once in awhile it's..

Headers/ 1994 camaro - So I have a 1994 camaro with 145k miles on it and a 3.4L V6.I take good care of my engine and have never had a single major engine problem.I currently have flower master dual chambered exhaust but would like to add headers...it's never loud enough for..

Replacment Fuel Pump for '94 Camaro 3.4 v6 - [b:2acafda30b]Hi everybody ! i am living in the Gulf riegon , my camaro 94 has a problem and need to replace it's Feul pump but this not easy here and it's hard to be found . anybody might help if ther's a replacment part for any other Chevy model tha...

92 camaro RS 3.1 liter lean condition - Ok, here goes, I had an EGR that was popping a code now and then because the wire connector was bad from heat exposure. I jumped terminal A and B to get code off system. I forgot about my jumper wire and started the car, realized my stupidity in about 5....
   AutoBoardz (Home) -> GM All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]