Help! 91 Prelude Oil light is coming on.

"Eric" <say.no.TakeThisOut@spam.now> wrote in message news:40D265DD.BFF216C1@spam.now...
 > Bullish.TakeThisOut@your.expense wrote:
  > >
  > > I have a 91 Prelude B21A1 which I auto-X regularly. Now after exiting
  > > the interstate idling at the light I noticed the oil light blinking.
  > > Idle seems a little low. Light goes out if raise idle to
  > > 1000-1100rpm. If i don't, ecu makes it start flashing & have to turn
  > > ignition off/on to reset it.
  > >
  > > Are the engines days numbered? Can someone explain in detail the
  > > oiling system. Is it likely the main crank bearing are where the
  > > pressure is being lost? Can an external oil pump be installed in the
  > > interim til an engine swap?
 >
 > It would be best to measure the oil pressure to determine if there's an
 > actual problem with the engine or just an electrical problem.
 >


If it's not electrical, check the oil intake in the oil pan. I don't know if
the '91 prelude has a screen on the oil intake, but my Civic does, and so does
every Civic from 84 to 91 (as far as I know, I don't know anything else..

Anyways, I Was having a problem with my car like that, and it was solved by
cleaning out the oil intake screen (not a big job), and then doing seeing if it
works..

--
Bullwinkle Jones.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Help! 91 Prelude Oil light is coming on. 

In article <rmo4d0p0rr6bq9lm67iu7dcso1h91hu4dg DeleteThis @4ax.com>,
Bullish DeleteThis @your.expense wrote:

 > I have a 91 Prelude B21A1 which I auto-X regularly. Now after exiting
 > the interstate idling at the light I noticed the oil light blinking.
 > Idle seems a little low. Light goes out if raise idle to
 > 1000-1100rpm. If i don't, ecu makes it start flashing & have to turn
 > ignition off/on to reset it.
 >
 > Are the engines days numbered? Can someone explain in detail the
 > oiling system. Is it likely the main crank bearing are where the
 > pressure is being lost? Can an external oil pump be installed in the
 > interim til an engine swap?

I agree with Eric--the oil pressure needs to be checked. If you don't know
how to do it, take the car to your favorite mechanic and have him do it
for you. Also, do a compression check on each of the cylinders. It's the
best way to know whether your engine is in great shape or poor shape.

--
NEWSGROUP SUBSCRIPERS MOTTO
We respect those subscribers that ask for advice or provide advice.
We do NOT respect the subscribers that enjoy criticizing people.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Help! 91 Prelude Oil light is coming on. 

On Fri, 18 Jun 2004 12:44:02 -0800, Jason.RemoveThis@nospam.com (Jason) wrote:

 >In article <rmo4d0p0rr6bq9lm67iu7dcso1h91hu4dg.RemoveThis@4ax.com>,
 >Bullish@your.expense wrote:
 >
  >> I have a 91 Prelude B21A1 which I auto-X regularly. Now after exiting
  >> the interstate idling at the light I noticed the oil light blinking.
  >> Idle seems a little low. Light goes out if raise idle to
  >> 1000-1100rpm. If i don't, ecu makes it start flashing & have to turn
  >> ignition off/on to reset it.
  >>
  >> Are the engines days numbered? Can someone explain in detail the
  >> oiling system. Is it likely the main crank bearing are where the
  >> pressure is being lost? Can an external oil pump be installed in the
  >> interim til an engine swap?
 >
 >I agree with Eric--the oil pressure needs to be checked. If you don't know
 >how to do it, take the car to your favorite mechanic and have him do it
 >for you. Also, do a compression check on each of the cylinders. It's the
 >best way to know whether your engine is in great shape or poor shape.

The way I'm running it at auto-x & a recent track day, I'm very sure
its an oil pressure loss problem. I recently had the oil pan off and
noticed a dozen or so 1-2mm non-magnetic metal flakes which I've been
told could've come from the main crank bearings. Does this sound
right? Is that loss of metal where I'm likely loosing oil pressure?
The oil pump can't really go bad, right? Although I don't really know
where it is. How is it connected to the internals?

Almost forgot, at that track day event, I ran the 1st 20min session
very strong & hard keeping up with the 4th & 5th gen ludes. Then
notices temp guage maxed at cool down lap. Didn't have heater blowing
for additional cooling. As soon as I turned it on, temp came down &
all seemed OK.
In 3rd session, downshifted to 2nd for accel out of hairpin and
noticed a serious lack of pull so I let up and idle wanted to drop to
500 and oil light flickered. So went to pit which was right there.
After short time restarted and idle seemed normal at 800.

Drove the 300 miles back home no problem. But oil light at every idle
now. How long before it seizes up?<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Help! 91 Prelude Oil light is coming on. 

Bullish.TakeThisOut@your.expense wrote:
 > On Fri, 18 Jun 2004 12:44:02 -0800, Jason.TakeThisOut@nospam.com (Jason) wrote:
 >
 >
  >>In article <rmo4d0p0rr6bq9lm67iu7dcso1h91hu4dg.TakeThisOut@4ax.com>,
  >>Bullish@your.expense wrote:
  >>
  >>
   >>>I have a 91 Prelude B21A1 which I auto-X regularly. Now after exiting
   >>>the interstate idling at the light I noticed the oil light blinking.
   >>>Idle seems a little low. Light goes out if raise idle to
   >>>1000-1100rpm. If i don't, ecu makes it start flashing & have to turn
   >>>ignition off/on to reset it.
   >>>
   >>>Are the engines days numbered? Can someone explain in detail the
   >>>oiling system. Is it likely the main crank bearing are where the
   >>>pressure is being lost? Can an external oil pump be installed in the
   >>>interim til an engine swap?
  >>
  >>I agree with Eric--the oil pressure needs to be checked. If you don't know
  >>how to do it, take the car to your favorite mechanic and have him do it
  >>for you. Also, do a compression check on each of the cylinders. It's the
  >>best way to know whether your engine is in great shape or poor shape.
 >
 >
 > The way I'm running it at auto-x & a recent track day, I'm very sure
 > its an oil pressure loss problem. I recently had the oil pan off and
 > noticed a dozen or so 1-2mm non-magnetic metal flakes which I've been
 > told could've come from the main crank bearings. Does this sound
 > right? Is that loss of metal where I'm likely loosing oil pressure?
 > The oil pump can't really go bad, right? Although I don't really know
 > where it is. How is it connected to the internals?
 >
 > Almost forgot, at that track day event, I ran the 1st 20min session
 > very strong & hard keeping up with the 4th & 5th gen ludes. Then
 > notices temp guage maxed at cool down lap. Didn't have heater blowing
 > for additional cooling. As soon as I turned it on, temp came down &
 > all seemed OK.
 > In 3rd session, downshifted to 2nd for accel out of hairpin and
 > noticed a serious lack of pull so I let up and idle wanted to drop to
 > 500 and oil light flickered. So went to pit which was right there.
 > After short time restarted and idle seemed normal at 800.
 >
 > Drove the 300 miles back home no problem. But oil light at every idle
 > now. How long before it seizes up?
 >
won't sieze, but will make a hideous knocking noise when the bearings go.

the flakes you mention /do/ sound like bearings. and this fits with
your low oil pressure because when the bearings are shot, they do not
seal against the crank & the oil leaks. i suggest you stop driving this
asap and strip this crank for inspection. if you're lucky, you might be
able to get away with just replacing the bearings, but i think it more
likely you'll need it reground.

what you do from here depends on how much money you want to spend.
cheapest way out is pick up another stock engine and swap. a better
solution would be to rebuild your old engine, but to do it well takes
$$$$'s. if you're competing, look at it as a great opportunity to
lighten the crank, con-rods, balance pistons, etc.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Help! 91 Prelude Oil light is coming on.