Hard to get off Spark Plug Boots

Hard to get off Spark Plug Boots
If you ever have a spark plug boot that is hard to get off one way
that has worked good for me is to take a 2-3 foot 3/16 brake line and
screw it into a air nozzle and then file the end of the line to look
like a hypo needle and then insert it between the boot and wire and
give it a short blast of air. It will balloon out and then you can
pull it right off, once in a while if they are still stuck I will
spray a little brake clean in between the boot and wire and they slide
right off.
------
JustAutoParts - a place to find automotive parts and technical advice.
http://www.JustAutoParts.ca // http://justautoparts.googlepages.com/index.html
http://justautoparts.googlepages.com/AutoPartsWay.html

On May 8, 12:43 pm, Just3 <justaffili....RemoveThis@gmail.com> wrote:
> Hard to get off Spark Plug Boots
> If you ever have a spark plug boot that is hard to get off one way
> that has worked good for me is to take a 2-3 foot 3/16 brake line and
> screw it into a air nozzle and then file the end of the line to look
> like a hypo needle and then insert it between the boot and wire and
> give it a short blast of air. It will balloon out and then you can
> pull it right off, once in a while if they are still stuck I will
> spray a little brake clean in between the boot and wire and they slide
> right off.
> ------

Using dielectric grease on the inner surface of the boot solves the
problem easier.