Gazelle Pinto/Mustang II suspension

FAQ

Profile

Gazelle Pinto/Mustang II suspension

AutoBoardz (Home) -> Kit Cars and Replicas

Next: 806 clutch / gearbox

Author

Message

miketor

Joined: May 06, 2011
Posts: 1

(Msg. 1) Posted: Fri May 06, 2011 5:56 pm
Post subject: Gazelle Pinto/Mustang II suspension

I purchased an assembled Gazelle kit based on a Pinto V6 engine and 4spd trans. The rear axle is not centered in the wheel arches and it needs to be moved ahead about 2 inches to place the tires in the proper position. I was wondering if the builder used the wrong springs when he built the car. The frame has a second set of mounting points but they would locate the springs even further back. Did the Pinto/ Mustang springs have different lenghts?
I appreciate hearing from anyone who has built one of these.
Thanks.

>> Stay informed about: Gazelle Pinto/Mustang II suspension

Display posts from previous:

Related Topics:

gazelle finding parts and accessories - I cannot seem to find any sites where I can buy parts for my newly aquired, mercedes gazelle kit car. It is on a Pinto, but I need things such as trim pieces, winshield supports and maybe a new chrome radiator casing. Any help greatly appreciated.

Gazelle -- Poor cruising speed - I just "discovered" this NG a couple of days ago, and noticed a long ago thread regarding a Gazelle kit car with a 2.3 liter engine and manual transmission which had a very low maximum cruising speed--around 50 mph. The discussion centered on t...

L'Automobile Ventura Kit Car question - Are there any Ventura experts out there with some info. I'm preparing to build on that was never assembled. Any responses would be nice Thanks Clark Garletts midasman@netdoor.com

Diecast Model Cars - Welcome to [url=http://www.thehobbyshopp.com]THS Diecast Cars (The Hobby Shopp)[/url]! We are your one stop online resource for custom high quality [url=http://www.thehobbyshopp.com/diecastcars.htm]1:18 scale diecast model cars[/url]! At THS, our..

Muncie Transmission Service - Hello...I offer a rebuild service on Muncie Transmissions and also do general machine work and welding. I re-sleeve and bore the countershaft openings back to 7/8" or open them up to 1" for a bigger countershafts. I also bore and tap 1/2-14NPT ...

	AutoBoardz (Home) -> Kit Cars and Replicas	All times are: Pacific Time (US & Canada)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum