Welcome to AutoBoardz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Engine stalls when 98 Protege placed in gear

 
   AutoBoardz (Home) -> Mazda RSS
Next:  89 Eldo water pump bolts  
Author Message
lilg




Joined: Mar 31, 2008
Posts: 1



(Msg. 1) Posted: Mon Mar 31, 2008 11:41 pm
Post subject: Engine stalls when 98 Protege placed in gear

I have a 1998 Protege LX with 156,000 miles, yesterday I started it and it started just fine. However, when I shifted to reverse and took my foot off the gas it shuddered and then died. I restarted it and it did it again. When I restarted it for the fourth or fifth time, I put my foot on the gas and it seemed to do better but when I would shift to drive it shuddered and died again. I idled sporatically in nuetral but did not die. When my husband looked at it I put it in reverse and it died. So I restarted it backed up, went forward and then put it in park so he could listen to it. As he was listening the idle evened out and it stayed running when shifted to different gears. When I drove it today it started to shudder but when I gave it gas it stayed running. It was really slow to start gaining speed when I went down the street, but I kept giving it gas and it kept going. Eventually it evened out and I had no other problems the rest of the day. This has us both stumped as I have not had any problems with my car yet. The transmission was flushed and had new fuel last year, I also replaced the fuel filter within the last few months. Do you have any ideas as to what could be causing this problem and how expensive it is going to be to fix.

 >> Stay informed about: Engine stalls when 98 Protege placed in gear 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
1997 Mazda Protege Radio Fuse - I can not find the fuse for the radio in my 1997 Mazda Protege can anyone help with this

02-03 Mazda Protege ELE error code P0300 - hi, I have this mazda protege with about 100k miles; had the spark plugs replaced and the O2 sensor, but the car still runs rough- like it idles rough-need to stay in the gas a little to keep the rpms up so it wont conk-out. Is it that it just needs ...

98 Mazda B4000 5spd stumble / engine balance - 129K miles check engine diagnosed by local Mazda as miss fire on cylinder #1. I replaced fuel filter, MAF (junk yard), 4 plugs out of 6 replaced (other two this week due to angle), replace all spark plug wires and an oil and filter change. On idle it..

1999 Mazda B2500 (Ford Ranger) revs own engine - I've got an odd problem with my 1999 Mazda B2500 (Ford Ranger under the hood), I'll post as much information about it as I can and see if it makes sense in the end. About two months ago, I had the following work done on the truck, in the following order...

1999 99 Mazda 626 V6 2.5L Check engine Light - EGR - My 626 recently was giving me a check engine light. It was intermittent for a while but then started staying on until I reset it by disconnecting the battery. I was going to bring it to Mazda, they said the EGR needed cleaning and I believe they quote...
   AutoBoardz (Home) -> Mazda All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]