Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Engine Tapping Noise

 
   AutoBoardz (Home) -> Toyota -> Toyota Tacoma Forum RSS
Next:  Workshop manuals,part catalogue  
Author Message
cea1

External


Since: Dec 16, 2005
Posts: 23



(Msg. 1) Posted: Tue Aug 14, 2007 1:54 pm
Post subject: Engine Tapping Noise
Archived from groups: alt>autos>toyota (more info?)

I have a 2001 Toyota Tacoma, V6, that was driven approximately 3 miles
without any oil in the engine. After reaching the truck I filled the
engine with oil, started it, and let it ran for a while. Since all
appeared to be fine, the truck was driven for approximately 30 miles.
After reaching the destination a slight noise was noticeable on the right
side of the engine. After letting the truck set for two hours, it was
driven, on the return trip, the same number of miles. While driving the
noise got a little louder. The truck set overnight, so when it was
started, the next morning, the noise developed into quite a loud tapping.


I thought the noise was coming from maybe worn lifters or camshaft lobes,
but there was no miss while the engine was running. After pulling the
value covers off, I measured the camshaft lobes and found that they were
all within tolerance and the lifters looked fine.

Please advise on what is the possible problem or problems.

 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
JoeSpareBedroom

External


Since: May 15, 2006
Posts: 1209



(Msg. 2) Posted: Tue Aug 14, 2007 5:56 pm
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"cea1" <cea1 DeleteThis @comcast.net> wrote in message
news:76547970f39eeb3fa4ea171deeeafe3f@localhost.talkaboutautos.com...
>I have a 2001 Toyota Tacoma, V6, that was driven approximately 3 miles
> without any oil in the engine.


Interesting. How did that happen?

 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
dbu`

External


Since: Aug 14, 2007
Posts: 95



(Msg. 3) Posted: Tue Aug 14, 2007 5:56 pm
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Imported from groups: per prev. post (more info?)

Back to top
Login to vote
suckers

External


Since: Jan 03, 2005
Posts: 235



(Msg. 4) Posted: Tue Aug 14, 2007 7:43 pm
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Sounds like rod bearing knock. The rod bearings are usually the first to
go
when an engine is driven without any oil as they absorb a considerable
amount of load and force compared to the camshaft bearings. Drop the oil
pan, see if it looks like silver glitter in the oil.
 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
cea1

External


Since: Dec 16, 2005
Posts: 23



(Msg. 5) Posted: Thu Aug 16, 2007 1:00 pm
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Okay, thanks for the advice! I'll drop the pan and give it a look. By the
way, if the rod bearing is bad, doesn't that also mean that the crank will
have to be serviced.
 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
johngdole

External


Since: May 31, 2007
Posts: 306



(Msg. 6) Posted: Thu Aug 16, 2007 6:26 pm
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

So you are completely without oil?

Where is the noise coming from? under the valve cover? or lower in the
engine? You may be able to get away with just a bearing job, or
actually a part of the typical "re-ring" job that also includes piston
ring set.



On Aug 16, 10:00 am, "cea1" <c....TakeThisOut@comcast.net> wrote:
> Okay, thanks for the advice! I'll drop the pan and give it a look. By the
> way, if the rod bearing is bad, doesn't that also mean that the crank will
> have to be serviced.
 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
Ray O

External


Since: Jun 02, 2006
Posts: 4627



(Msg. 7) Posted: Fri Aug 17, 2007 1:41 am
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"cea1" <cea1.RemoveThis@comcast.net> wrote in message
news:662edb99c524e6c0e4babf6894f1d667@localhost.talkaboutautos.com...
> Okay, thanks for the advice! I'll drop the pan and give it a look. By the
> way, if the rod bearing is bad, doesn't that also mean that the crank will
> have to be serviced.
>

If the rod bearing is bad, then at the very least, the crankshaft will have
to be inspected.
--

Ray O
(correct punctuation to reply)
 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
cea1

External


Since: Dec 16, 2005
Posts: 23



(Msg. 8) Posted: Fri Aug 17, 2007 8:35 am
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Back to top
Login to vote
cea1

External


Since: Dec 16, 2005
Posts: 23



(Msg. 9) Posted: Fri Aug 17, 2007 8:51 am
Post subject: Re: Engine Tapping Noise [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

The noise appeared to be coming from the beneath the value covers, which
caused me to think that the lifters were tapping, but after removing the
covers the lifters, and camshaft lobes, looked to be in great condition.
 >> Stay informed about: Engine Tapping Noise 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
97 Tacoma noise ? - Has anyone out there ever had this problem? Squeaky driver side wheel well. Repair garage rebolted the brush guard, sprayed the wheel spring, did a grease job, WD40'd the leaf springs in the rear. The only solution is riding with the stereo on very loud....

Life of Tacoma after new engine - If I do place a new engine in my Toyota Tacoma 4X4, how much life can I expect out of it after that? I know the engine should be good, but how well will everything else hold up- axle rods, drive shaft, etc? It's at 160,000 now.

Which Toyota Tacoma 4x4 to Buy? - I'm in the market for a used Toyota Tacoma. Right now I'm looking at 2 Tacomas. One is a 2000 Tacoma 4x4 3.4L v6 extended cab with 143,000 miles and a nice fiberglass cap with a negotiated price of $9,500. The other is a 1997 Tacoma 4x4 3.4L v6..

interested in a tacoma - It's time for me to get rid of my 1994 Camry and get a small pickup truck. Since I have owned Toyotas and Nissans mostly, I will probably look at them strongly. If someone thinks the American brands are good also I'll listen My requirements are extende...

2005 Tacoma trailer wire harness - I didnt buy the tow package with my new 05 Tacoma access cab. Does anyone know if there is a connector for a trailer wire harness already installed on the tail light harness? I have not been able to find a 05 after market wire harness yet. I hate to..
   AutoBoardz (Home) -> Toyota -> Toyota Tacoma Forum All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]