On Wed, 16 Aug 2006 10:06:06 -0400, "HDTT" <newzach04 RemoveThis @aol.com> wrote:
>HAS ANYONE HAD THIS PROBLEM WITH THERE 1996 DODGE 1500 P/U.
NO, BUT...if you have not replaced the battery cables and the cable to the
starter you could try that, or measure what the voltage drops to at the starter
when you try to crank it over, compared to what the voltage is at the battery
terminals under the same conditions. You might have some corrosion inside the
cable near where the ends are crimped or soldered that is hidden from view
externally. good luck, Joe.
>> Stay informed about: ELECTRICAL PROBLEM