Crank Position Sensor

http://Hyundai-SantaFe.autoboardz.com/97-Grand-cly-Crank-Position-Sensor-location-ftopict198590.html (97 Grand AM 2.4 4 cly Crank Position Sensor location)
I have a 97 Grand Am and have a code that says the Crank Position Sensor is bad. It has a 2.4 liter engine with a auto trans. I have been told that the sensor is located above oil filter on front of engine. I have pulled the alternator to get a better look but still cant locate the dang thing. ..
« Okay, there is a bracket/brace right above your oil filter on a 2.4l that bracket will onstruct your veiw othe the CKP sensor....just above and slightly to the right of where your oil filter screws .. »
« Thanks for the great info. I was able to find and change it out and now the car runs fine. »
« Click on the little picture of the engine compartment to get a more detailed view. Jim »
« Took a look at the pictures and they dont show my engine, or the location of the Crank Position sensor »

http://Hyundai-SantaFe.autoboardz.com/Crank-Position-Sensor-1993-ohc-ftopict212000.html (Crank Position Sensor 1993 2.0 ohc)
Hey all, we just completed putting a new head/gasket on a 1993 Sunfire due to a bad exhaust valve and half a dozen cracks in the head. The first 10 miles it ran fine. After that it started running poorly and more poorly until it finally died and wont start. It has 140 lbs compression in all cylind..

http://Hyundai-SantaFe.autoboardz.com/crank-position-sensor-ftopict213146.html (crank position sensor)
my 535i is in need of a crank position sensor, teel me where is it located, and can i replace it?
« located, year, please. e28, e34? »
« its a 95 »
« According to http://www.realoem.com, 2-1993 was the last production date for theU.S. version M30 535i. The crank position sensor is on the front and reads the harmonic balancer (pin). It's a 15-minute job .. »

http://Hyundai-SantaFe.autoboardz.com/1992-Chevy-Lumina-engine-Crank-sensor-ftopict235110.html (1992 Chevy Lumina 3.1 engine- Crank sensor, where?)
I am having problems locating the Crank Position Sensor (CPK)..???Any help on this would be greatlt appreciated- Thanks!
« the crank sensor is above the engine oil on the firewall side. it is a real pain to get at. if you remove the right wheel and transaxle supporting bracket you can get a direct view of it. make sure .. »