Thanks for the info Paul, I'll check it out
Dosio
<carbide.DeleteThis@egine.com> wrote in message
news:1167678070.977241.295140@k21g2000cwa.googlegroups.com...
>
> dosio wrote:
>> Hi everyone,
>> I've got Explorer 99' , sport , 4x4, OHV engine. Recently I've noticed
>> speedometer' lights quit on me, and only one is working. Is anybody have
>> experience of replacing the bulbs? Do I need to take the speedometer out
>> or
>> I can reach it underneath? I'll be very appreciated for any inputs
>> Thanks in advance
>
> I replaced the speedo on my '94. It required removing the instrument
> panel, and I'm sure it's the same to replace the bulbs for your '99.
> If you have a Haynes manual or similar, check that. Autozone may have
> an online procedure if you don't have a manual. It's very helpful to
> have a procedure to follow as it will tell you what to remove and in
> what order.
>
> The hardest part for me was getting the wiring harness disconnected. I
> could barely get my hand in there.
> Good luck with it.
> -Paul
> >> Stay informed about: 99' Explorer Speedometer