Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

98 Silhouette Window Falls

 
   AutoBoardz (Home) -> GM RSS
Next:  American Technology at its best.  
Author Message
janicembrown

External


Since: Feb 22, 2007
Posts: 1



(Msg. 1) Posted: Thu Feb 22, 2007 6:32 pm
Post subject: 98 Silhouette Window Falls
Archived from groups: alt>autos>gm (more info?)

For almost a year now I have been having to pull my window into
place. On the driver side the window goes down just fine. When I got
to roll it up it takes a forward dive and I have to use my hand to
pull the front of the window up level (normal) to get it lined up and
in the track.

We (tonight) replaced the regulator that also came with the bar that
the front of the window tracks in where the weather stripping rides.
After 4 hours of frustration the same problem still exists. It is not
a power issue as it moves with great force as long as I have it level
by pulling up the front.

Anyone had this problem before? I have searched and searched and
found no postings anywhere about this type of thing.

Thanks for any help

 >> Stay informed about: 98 Silhouette Window Falls 
Back to top
Login to vote
johnoz19

External


Since: Feb 19, 2007
Posts: 30



(Msg. 2) Posted: Thu Feb 22, 2007 11:54 pm
Post subject: Re: 98 Silhouette Window Falls [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

It's been a long time since I've seen one.
Sounds like you need new clips on the bottom of the glass, that go into the
lower run channel.

 >> Stay informed about: 98 Silhouette Window Falls 
Back to top
Login to vote
Harry Face

External


Since: Feb 28, 2006
Posts: 103



(Msg. 3) Posted: Sat Feb 24, 2007 2:33 pm
Post subject: Re: 98 Silhouette Window Falls [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

This may apply to your car, I'm not sure

Is the plastic guide broken off the top rear corner of the window? That
will cause it to fall forward. The guide ( kind of like an ear) snaps
over the top rear corner of the glass and rides up through the rear
window track

good luck

h
 >> Stay informed about: 98 Silhouette Window Falls 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
97 Trans Sport/Venture/Silhouette Window Regulator - Anyone have experience changing a window regulator in a 97 GM Minivan? My Trans Sport has a bent regulator. I've bought a new one, but need advice on removing the window and dealing with the big spring. Any help?

A/C Condenser Failure in Montana Ventur Silhouette - Anyone? - Hi all. In 2004 my 2002 Montana with 40K lost the condenser. It developed a leak on the lower corner passenger side. GM would not cover it as it was over 36K. After paying a lot to have it repaired, my 2001 had the same failure a week later at 54K. ...

Window Handle - Does anyone know how to remove the window handle on a '95 chevy pickup. I need to get the door paneling off so I can tighten the exterior handle. It is falling off. Is there a horse-shoe clip that needs to be removed? I could't really see too well.

Impala Window Regulator - Hello: I really long for the days of roll up and down manual windows! The biggest and most expensive issues I had with my old Crown Vic was constant window regulator failures. Now it seems my Impala is following the Crown Vics footsteps. Anyhow, it was..

1994 Saturn Window Motor - Anyone know how to access the window motor to a 1994 Saturn for replacement. The maintance manual I have is very unclear and it looks like the door has to be removed and then disassembled. Is this correct?
   AutoBoardz (Home) -> GM All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]