97 Grand AM 2.4 4 cly Crank Position Sensor location

I have a 97 Grand Am and have a code that says the Crank Position
Sensor is bad. It has a 2.4 liter engine with a auto trans. I have
been told that the sensor is located above oil filter on front of
engine. I have pulled the alternator to get a better look but still
cant locate the dang thing. I have the new sensor so I know what Im
looking for. Can anyone give me a little more information? What do I
have to pull to get to it? Is it above the starter (Pull the starter)?
Is it behind the dampner pully (Pull the passanger tire, splash guard,
and pully)? One guy even told me it was behind the back end of the
engine, fireall side, by the transaxel case. I have had good luck on
here getting good info hope it works again. Any help would be greatly
appreciated.

George Jetson wrote:
> http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/090...3d/80/0
>
> Click on the little picture of the engine compartment to get a more detailed
> view.
>
> Jim
>
> "97 jimmy" wrote in message
>
> >I have a 97 Grand Am and have a code that says the Crank Position
> > Sensor is bad. It has a 2.4 liter engine with a auto trans. I have
> > been told that the sensor is located above oil filter on front of
> > engine. I have pulled the alternator to get a better look but still
> > cant locate the dang thing. I have the new sensor so I know what Im
> > looking for. Can anyone give me a little more information? What do I
> > have to pull to get to it? Is it above the starter (Pull the starter)?
> > Is it behind the dampner pully (Pull the passanger tire, splash guard,
> > and pully)? One guy even told me it was behind the back end of the
> > engine, fireall side, by the transaxel case. I have had good luck on
> > here getting good info hope it works again. Any help would be greatly
> > appreciated.
> >

Took a look at the pictures and they dont show my engine, or the
location of the Crank Position sensor