Welcome to AutoBoardz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

97 2.0L Mits Eclipse Engine Timing- won't start

 
   AutoBoardz (Home) -> Mitsubishi RSS
Next:  VOLVOXC70 AWD Diesel  
Author Message
jkooz




Joined: Dec 05, 2010
Posts: 1



(Msg. 1) Posted: Sun Dec 05, 2010 11:29 pm
Post subject: 97 2.0L Mits Eclipse Engine Timing- won't start

My 97 eclipse was running fine the day before with no issues. First cold evening and in morning the car started right up, but began missing, making thumping sounds in engine, and gas fumes from exhaust, and then died like it was badly out of time. The timing belt was replaced less than 20k miles ago and inspection of cam belt site cover shows the belt and cams are turning during starting. I suspect the noises heard were the valves being bent/broken. The diagnostic codes of the check engine light revealed, 12, 17, 22, and 55. (which using only the 17 and 22, indicate a temp not reached, and 22 coolant sense high/low) I am suspecting the bad out of timing caused valve damage, but is there any other explanation of the symptoms that would be less severe and inexpensive to fix?

 >> Stay informed about: 97 2.0L Mits Eclipse Engine Timing- won't start 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
03 Eclipse: Won't Start - Seems the bad weather in NJ (ice and below freezing temps) have done my poor little ride in. First I thought it was the battery but alas, even with a Jump, only worked once. 6 Cyl GT Manual Symptoms: Turn the Ign. Key, dashboard lights up and just..

Check Engine Light - EGR issue '01 Eclipse Spyder - Hello, My check engine idiot light keeps coming on - code as checked from Autozone says EGR valve flow issue.... I took out the valve, cleaned it off... checked the valve operation.. seems to be working okay.. Any ideas?... it comes and goes... ..

mits diamond spI/spII - mits, diamond sp1 or 2, i was wonder what the color of this transmission fluid suppose to be. I have a 2000 gallant and the transmission's fluid is starting to look a little brownish but i just had the transmissin fluid change 1 year ago. is it suppos...

95 mits. galant auto 155000mi - hi, as previously noted here my car would start and stall it does run just keeps stalling.i was told i need an engine or a valve job. after everything was supposedly checked including compression test #1 cylinder 200lb. #2 cyl.200lb #3 180lb and #4 180lb...

Balance shaft timing on Galant 2.0 SOC engine - I have seen numerous posts about the balance shaft timing issues on this Mitsubishi 2.0 engine. I have tried twice now to get the timing right without using the screwdriver (8 mm rod) to check the shaft position, and I still have a vibration in the..
   AutoBoardz (Home) -> Mitsubishi All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]