Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

96 BLAZER

  
   AutoBoardz (Home) -> Blazer RSS
Next:  1999 blazer transfer case problems  
Author Message
woodbepete

External


Since: Dec 12, 2006
Posts: 3



(Msg. 1) Posted: Tue Dec 12, 2006 2:28 pm
Post subject: 96 BLAZER
would any one know anything about removing fan from water pump

 >> Stay informed about: 96 BLAZER 
Back to top
Login to vote
deafone

External


Since: Oct 21, 2006
Posts: 16



(Msg. 2) Posted: Sat Dec 16, 2006 8:12 am
Post subject: Re: 96 BLAZER [Login to view extended thread Info.]
Yea take the upper fan shroud bolts our and the 2 side bolts on both sides
then the 4 nuts that are on the fan itself... leave belt on it helps and
buy a book that helps you with repairs on this car.like the Haynes repair
manual you can get them at most autoparts stores.at least here in the US

 >> Stay informed about: 96 BLAZER 
Back to top
Login to vote
jerry

External


Since: Dec 11, 2006
Posts: 9



(Msg. 3) Posted: Thu Dec 28, 2006 6:37 pm
Post subject: Re: 96 BLAZER [Login to view extended thread Info.]
there are no 4 nut set up on this year blazer. There is 1 large center
nut holding the fan in place. The idea of leaving the serp belt is a
valid one but beyond that what I do is get a large crecent wrench-
adjust it to the size of that center nut, put it on that 'center nut'
then 'crack' it strategically-counterclockwise with a hammer to jar it
loose. Once 'cracked' properly, it will spin off fairly easy. Reverse
procedure upon water pump re-installation. Merry New Year
Jerry DeleteThis @peru-motors.com



deafone wrote:
> Yea take the upper fan shroud bolts our and the 2 side bolts on both sides
> then the 4 nuts that are on the fan itself... leave belt on it helps and
> buy a book that helps you with repairs on this car.like the Haynes repair
> manual you can get them at most autoparts stores.at least here in the US
 >> Stay informed about: 96 BLAZER 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
other blazer question - My blazer has 130K now. When will I need to change the timing belt/ chain?

ticking blazer - got a weird problem.....i have a 98 blazer 6 cyl. 90,000 mi, directional flasher clicks whenever ignition is on, directional lights do not flash. directionals will flash normally. hazards work prop. clicking stops when brake is depressed. changed..

fan blazer - Ok...ive got the proper sized wrench and a mallet...but how do i keep the shaft from turning?

Chevrolet Blazer, firingorder - Hello !! I wonder if someone can tell me wich firingorder my Blazer -95 with 4,3 l vortec engine has ? Best regards Anders from Sweden

99 Chevy Blazer - The hood latch on my blazer is broken, and I'm trying to figure out another way to open the hood any suggestions would help, thanks
   AutoBoardz (Home) -> Blazer All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]