94 Dodge Caravan

http://Hyundai-SantaFe.autoboardz.com/94-dodge-caravan-timing-marks-ftopict192069.html (94 dodge caravan timing marks)
Hi everyone, hope someone can help. I'm trying to get the timing marks right on my 94 caravan. I've positioned both cams and crank pulleys to their respective marks. Fitting the timing belt I have found that the front mark on the cam pulley(distributor) is out by half a tooth. I've rotated the..
« You need to let us know what engine you are working on, The 4 cylinder has only one cam and an intermediate shaft (distributor drive). The 6 cyl has 2 camshafts but no Intermediate shaft (Distributo.. »

http://Hyundai-SantaFe.autoboardz.com/94-Dodge-Caravan-ftopict192099.html (94 Dodge Caravan)
I have had this van for some years now. I have always had problems with it eating through tires, yes I have had and alignment, It is hard to shift to reverse while on a hill, the transmission is very sluggish while driving up a hill and shudders and shakes. Recently it is rough running and wants..
« Check the store fault codes in the computer (method can be found in other posts.) It sounds like a possible problem from something simple like a vacuum leak, or perhaps an issue with the Idle Air.. »
« What engine? »

http://Hyundai-SantaFe.autoboardz.com/serpentine-belt-falls-caravan-jerks-ftopict233407.html (serpentine belt falls off and caravan jerks)
I bought a 94 dodge caravan last year. So every time it rains the serpentine belt comes off. I replace the belt twice also when I go to the speed of 45 and 55 the caravan jerks and then it stops when I get to 60 mph. Can anybody give me some suggestions.:confused: -- ---------------------------..
« "cathleenharrison@yahoo.co" The belt tensioner may be bad causing a slight tilt on the belt, rain hits it and it slides off. Glenn Beasley Chrysler Tech »

http://Hyundai-SantaFe.autoboardz.com/94-dodge-caravan-ignition-ftopict246511.html (94 dodge caravan ignition)
Hi everyone, my ignition is now fixed. The wire coming from the distributor was the culprit! The pickup wiring is in a sheath thet has a braided wire casing (a fine one). This sheath had rubbed through on the engine and ultimately one of the wires. I could make the engine stop by bending the g..