"Shawn H" wrote in message
>
> damnnickname;720424 Wrote:
> > You say you checked spark and fuel but dont specify what the fuel
> > pressure
> > is? You mention nothing about checking to see if there are any fault
> > codes
> > stored in the engine controller. and you dont specify what engine this
> > vehicle has.
> >
> > Glenn Beasley
> > Chrysler Tech
>
> Sorry, the fuel pressure is 46 psi, there are no faults in the
> computer, and the vehicle has the 3.0 v6.
>
>
>
>
> --
> Shawn H
Did you remove the upper timing belt cover to make sure the cams are set
with the crankshaft? If you have compression, and you have spark and you
have fuel it should start. try to disconnect the Map sensor to see if it
starts
Glenn
>> Stay informed about: 93 spirit wont start