90 Acura Integra

http://Toyota.autoboardz.com/90-acura-integra-seat-belt-issue-ftopict203775.html (90 acura integra seat belt issue)
My automatic seat belt on the drivers side on my 1990 Acura Integra decided to stop working. It's stuck back in the restrained position which is FINE - I can live with this. What I cannot live with is the BEEPING that the car does all the time now when I drive (the light also blinks but I can deal..
« Check with your local Honda/Acura dealer. I believe the seatbelt assembly is warranted for the life of the car. Mike »

http://Toyota.autoboardz.com/Acura-Integra-Start-ftopict210442.html (Acura Integra Will Not Start)
Hello, I was driving home and my 90 Acura Integra just engine quit. I pulled over and imediatley checked the spark plugs for a spark. (The car quit the same way 6 months earlier, but it was a failed distributor) There was a spark. So I towed the car to my house and checked the fuel. I pulled t..
« I like to verify whether the problem is fuel delivery by seeing if a burst of starting fluid in the air cleaner produces a vroom when the engine is cranked. Anyway, a thought from left field. My s.. »
« Thanks. I will try the starting fluid. I am also going to borrow a fuel pressure guage to check if the fuel pump is delivering enough pressure. I did verify that the cam and crank were still in ti.. »
« @l77g2000hsb.: Don't pull the line at the filter, pull the low-pressure line from the fuel pressure regulator. This way you know fuel is making it to the far side of the fuel rail. Have you checke.. »
« Tegger wrote in Temporarily install a length of fuel hose to the output of the regulator, and put the other end of that into a jar. Keeps things neat, of course. -- Tegger The Unofficial Honda/A.. »

http://Toyota.autoboardz.com/Starts-quits-Starts-ftopict221930.html (Starts then quits then Starts??)
I have a 90 Acura Integra. Most of the time when I go to start the enigines fires off for less than a second then quits. The second start try usually works and I have no issues until I try to restart the car again. I have changed the main fuel pump relay, installed a new starter, and a new fuel ..
« Ignition switch? What you describe is usually the Main Relay, which you say you replaced. Was the replacement a new one or one from a wreck? -- Tegger The Unofficial Honda/Acura FAQ http://www.tegger.com.. »
« it would not surprise me to find a new relay having bad solder joints. -- Jim Yanik jyanik at kua.net »
« Jim Yanik wrote in I doubt that. Honda is not in the habit of allowing defective goods into its parts stream. Main Relays go bad through heat cycling and vibration. -- Tegger The Unofficial Hond.. »
« solder can crystallize over time.If a relay has been sitting in stock for a long time,it's solder joints could be crystallized,ready to crack under stress or thermal cycling.(tin migrates,grows wh.. »

http://Toyota.autoboardz.com/Starting-issue-ftopict223800.html (Starting issue)
I have a 90 Acura Integra. Occasionally when I turn the key I get nothing. The starter does not click. It is very similar to when trying to start the car while it is in drive. I have recently changed the ignition switch, main relay, starter and fuel pump. These were all changed for other reas..
« -------------------------------- THe starter solenoid finds it's path to ground through the armature and brushes. Just tapping the side of the starter with a hammer will usually make your car star.. »
« I just replace the starter and there is not a click. There is nothing. I am not saying that I could have purchased a bad starter. I bought a reconditioned one from NAPA. Sometimes it will start w.. »
« "BenNASA@gmail.com" wrote in how's your battery? as far as the gear selector interlock,you could rig a bypass starter switch,see if your car cranks then. -- Jim Yanik jyanik at kua.net »
« The battery is new. I will try to jumper the switch the next time this happens. »