Hi all,
I replaced the engine (305) in my Blazer (full size) with one from
AutoZone and things went
pretty well. However, the power steering pully is no longer aligned
correctly. Did I miss/lose something when I tore the original down?
It's about
1/8 - 1/4 off center(offset towards the rear). Of course, this is the
one PHOTO that I took of the engine before I started that wasn't really
clear and the Haynes manual wasn't much help either.
If anyone has any ideas, please let me know. I have a couple of decent
photos for anyone that can help.
TIA.
Rick
>> Stay informed about: 86 chevy 305 power steering pump