|
Related Topics:
| 1983 300cd A/C compressor not engaging - Hello all, I have an 1983 mercedes 300cd. The a/c clutch is not engaging. I have tried all the things I know. It is not the pressure switch, I put 12 volts to the compessor side of the switch and the clutch engages, all blower controls work..
1983 300cd A/C compressor will not engage - Hello all, I have an 1983 mercedes 300cd. The a/c clutch is not engaging. I have tried all the things I know. It is not the pressure switch, I put 12 volts to the compessor side of the switch and the clutch engages, all blower controls work..
1982 300CD Tranny dtat replacement - relay(?) failure produces switching sounds from under the hood & behind the cluster, after which, radio must be total power loss. Thanks in advance for any
1983 300cd A/C compresor clutch not engaging - Hello all, I have an 1983 mercedes 300cd. The a/c clutch is not engaging. I have tried all the things I know. It is not the pressure switch, I put 12 volts to the compessor side of the switch and the clutch engages, all blower controls work..
Mercedes Benz 300CD Turbo Diesel 1982-1985 - What are the between a 1982 and a 1985 300CD Turbo Diesel?
|
|
|
Next: 1° Raduno 500 Mythical Car;
|
| Author |
Message |
External
Since: May 23, 2007
Posts: 12
|
(Msg. 1) Posted: Mon Jul 14, 2008 2:36 pm
Post subject: '82 300CD-T Rear Rubber Bumper Pad Replacement  Add to elertz
Archived from groups: alt>auto>mercedes (more info?)
|
|
|
The rubber pad on the rear bumper of my '82 300CD-T has lost its
ability to stay attached, and I have some questions about replacing
it. When the bad pad is removed, the driver's side of my bumper has
"female" slots for the "male" protrusions of the rubber pad, some of
which have broken off (hence the problem), but the passenger side of
the bumper has a white plastic strip that is meant to go inside the
channel of the rubber bumper pad. In looking at replacement bumper
pads on MercedesSource, I don't see the "male" protrusions on the
driver's side pad, just the channel for fitting over the white plastic
strip. Is it normal that the pad attaches differently on one half of
the bumper than the other? |
|
| Back to top |
|
 | |
External
Since: May 23, 2007
Posts: 12
|
(Msg. 2) Posted: Mon Jul 14, 2008 5:12 pm
Post subject: Re: '82 300CD-T Rear Rubber Bumper Pad Replacement Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I realize now that the rubber pad had simply taken the driver's side
plastic piece along with it when it came off. Where's the best place
to get a replacement plastic strip and what's the best way to attach
it to the chrome bumper?
On Jul 14, 2:36 pm, eyeball kid <austin.si....DeleteThis@gmail.com> wrote:
> The rubber pad on the rear bumper of my '82 300CD-T has lost its
> ability to stay attached, and I have some questions about replacing
> it. When the bad pad is removed, the driver's side of my bumper has
> "female" slots for the "male" protrusions of the rubber pad, some of
> which have broken off (hence the problem), but the passenger side of
> the bumper has a white plastic strip that is meant to go inside the
> channel of the rubber bumper pad. In looking at replacement bumper
> pads on MercedesSource, I don't see the "male" protrusions on the
> driver's side pad, just the channel for fitting over the white plastic
> strip. Is it normal that the pad attaches differently on one half of
> the bumper than the other? |
|
| Back to top |
|
| |
External
Since: May 01, 2008
Posts: 47
|
(Msg. 3) Posted: Tue Jul 15, 2008 3:42 pm
Post subject: Re: '82 300CD-T Rear Rubber Bumper Pad Replacement Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
eyeball kid wrote:
> I realize now that the rubber pad had simply taken the driver's side
> plastic piece along with it when it came off. Where's the best place
> to get a replacement plastic strip and what's the best way to attach
> it to the chrome bumper?
>
> On Jul 14, 2:36 pm, eyeball kid <austin.si....TakeThisOut@gmail.com> wrote:
>> The rubber pad on the rear bumper of my '82 300CD-T has lost its
>> ability to stay attached, and I have some questions about replacing
>> it. When the bad pad is removed, the driver's side of my bumper has
>> "female" slots for the "male" protrusions of the rubber pad, some of
>> which have broken off (hence the problem), but the passenger side of
>> the bumper has a white plastic strip that is meant to go inside the
>> channel of the rubber bumper pad. In looking at replacement bumper
>> pads on MercedesSource, I don't see the "male" protrusions on the
>> driver's side pad, just the channel for fitting over the white plastic
>> strip. Is it normal that the pad attaches differently on one half of
>> the bumper than the other?
>
There is a lot of stuff here for MBZs:
http://www.autohausaz.com/
Good hunting  >> Stay informed about: '82 300CD-T Rear Rubber Bumper Pad Replacement |
|
| Back to top |
|
| |
External
Since: May 23, 2007
Posts: 12
|
(Msg. 4) Posted: Thu Jul 17, 2008 1:51 pm
Post subject: Re: '82 300CD-T Rear Rubber Bumper Pad Replacement Add to elertz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I found a new plastic "impact strip holder." at Performance Products
(http://www.performanceproducts4benz.com), right up the road from me.
Now what's the best way to attach it to my bumper? Will the hooks hold
it sufficiently on their own? I noticed that the old one had some sort
of rubbery adhesive in various spots.
On Jul 15, 3:42 pm, RF <R....RemoveThis@NoDen.con> wrote:
> eyeball kid wrote:
> > I realize now that the rubber pad had simply taken the driver's side
> > plastic piece along with it when it came off. Where's the best place
> > to get a replacement plastic strip and what's the best way to attach
> > it to the chrome bumper?
>
> > On Jul 14, 2:36 pm, eyeball kid <austin.si....RemoveThis@gmail.com> wrote:
> >> The rubber pad on the rear bumper of my '82 300CD-T has lost its
> >> ability to stay attached, and I have some questions about replacing
> >> it. When the bad pad is removed, the driver's side of my bumper has
> >> "female" slots for the "male" protrusions of the rubber pad, some of
> >> which have broken off (hence the problem), but the passenger side of
> >> the bumper has a white plastic strip that is meant to go inside the
> >> channel of the rubber bumper pad. In looking at replacement bumper
> >> pads on MercedesSource, I don't see the "male" protrusions on the
> >> driver's side pad, just the channel for fitting over the white plastic
> >> strip. Is it normal that the pad attaches differently on one half of
> >> the bumper than the other?
>
> There is a lot of stuff here for MBZs:
>
> http://www.autohausaz.com/
>
> Good hunting >> Stay informed about: '82 300CD-T Rear Rubber Bumper Pad Replacement |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in
