67 Mustang Coupe

http://Toyota.autoboardz.com/67-Mustang-Coupe-Flasher-Location-TIA-ftopict238102.html (67 Mustang Coupe Flasher Location? TIA)
1967 Mustang Coupe w/factory AC,PS,PB,MT Any ideas where the turn signal flasher is? It doesn't seem to be where either Ford or friends say. Any and all replies appreciated.
« if you are talking about the flasher module it is probably where the 66's were located... in the glove box( mine also had a switch to put on the emergency flashers....... so if yoiu have this switch.. »
« You mean the things that go "de-doink"? Mine where behind the dash cluster. Should be attached to the back of it actually. There are two. Howard Juneau wrote: »
« The Emergency flasher is on a bracket screwed to the peadl support. The turn signal is on the back of the dash cluster as mentioned near the clock. StuK »
« Thanks to all! I checked in the glovebox and, after pulling the glove box, checked everywhere near the glovebox and found nothing. With a hand through the ashtray opening, I checked on the back of .. »

http://Toyota.autoboardz.com/67-mustang-coupe-clutch-pedal-floor-ftopict238230.html (67 mustang coupe clutch pedal on floor)
clutch pedal on floor three speed sunk to floor, linkage looks ok all way to tranny/ does this sound like throw out bearing. thanks for any info!
« Is this a car you drive? Did it just happen? Did it get that way slowly, or all at once? Is it a stock clutch assembly? Did you just come across the car and never driven it? »
« linkage "looks" okay?!!! Just sitting there - or while you move the clutch pedal? -- - Yes, I'm a crusty old geezer curmudgeon.. deal with it! - »
« yes i drive the car on sunny days temperature 72 degrees not a cloud in the sky, slight breeze from the west, no humidity at least according to my exwife. have had it eleven years all orginal, stock.. »
« can reach into engine bay and move by hand/ clutch pedl does nothing but sink to floor when pushed,has no effect on linkage, thanks for your help »

http://Toyota.autoboardz.com/67-Mustang-Coupe-20-000-painted-choice-color-ftopict238484.html (67 Mustang Coupe. $20,000 painted your choice of color. Or..)
I have been working on a 67 Mustang Coupe project. I replaced all the rusty floor pans, frame rails, battery tray area, trunk areas and inner cowl panel. The outside sheet metal is excellent. I had the car sand blasted and it has self etching primer on it. The interior floor pans and entire under ..

http://Toyota.autoboardz.com/67-Mustang-Coupe-restored-19-500-Pseudo-Bullit-ftopict238503.html (67 Mustang Coupe. Just restored. $19,500 - Pseudo Bullit C..)
67 Mustang Coupe. Just restored. $19,500 - Pseudo Bullit Coupe -------------------------------------------------------------------------- Complete restoration replacing floor pans, frame rails, cowl inner areas etc. Show quality base coat/clear coat paint job. 302 roller Mustang GT engine, Edelbro..