Peter...
I would guess the Center High Mounted Stop Lamp (CHMSL) was not working
before the sunroof was installed. If this seems probable or at least
possible to you, remove the bulb and test it with a continuity tester. If
the bulb tests "good" then test for 12 vdc at the bulb socket while the
brake pedal is depressed. There are several wires from the brake switch to a
couple of electronic devices including the brake lights. I would think the
CHMSL wires would be included in the bundle going toward the brake lights
rather than be routed singularly through the headliner area.
"PETER MCGLOUGHLIN" <pedro68 RemoveThis @verizon.net> wrote in message
news:crL9h.8191$oP6.1558@trnddc03...
>I had a flipout sunroof installed over the summer ,they cut the dome light
>out ,which i think went to the third brake light that is not working .Since
>there is know wire in the head rest how would i get power to that top
>brake light ?????
> >> Stay informed about: 2002 dodge truck wiring