i really doubt u did it correctly .
1. Turn the ignition switch to the ON position, marked II.
2. Press the LOCK button.
3. Turn the ignition switch to the ACCESSORY position, marked I.
Next, turn the ignition switch to the ON position (II) for a fourth
time.
Press the LOCK button again. The door locks should now make a cycling
sound, indicating that the system has entered Programming Mode.
Press the LOCK button one more time to program this remote. If you have
other remotes to program, press the LOCK button on each one in turn.
The door locks should make the cycling sound after you press LOCK on
each remote. You may program up to three remotes, and they must all be
programmed within ten seconds of each other.
Turn the ignition off and remove the key. The remotes are now
programmed and may be tested.
>> Stay informed about: 2002 Civic EX - Keyless Entry Fails after Battery Replacem..