2002 Dodge Neon Problems

http://Dodge-Neon.autoboardz.com/2002-Dodge-Neon-Trans-Problems-ftopict250695.html (2002 Dodge Neon Trans Problems)
When I my 2002 Dodge Neon the speedometer does not register it stays in first gear the whole time i am driving and the check engine light is on!! What do I do?? I have already replaced the trans ecu..

http://Dodge-Neon.autoboardz.com/2002-Dodge-Neon-ftopict248134.html (2002 Dodge Neon)
My daughter's 2002 Neon is having a problem - when stopped at light it hesitates and sometimes stalls. When you are backing up and turning the wheel hard it will sputter and try to stall. Any sugges..
« "muddogcoach" wrote in message wheel Is the check engine on? When was the last time it had a tune up with a good set of plug wires? Gl.. »
« "muddogcoach via CarKB.com": who yet. wheel good Connect scan tool and drive until it gets hot, do a couple of decels from about 45mph dow.. »
« On Jul 8, 9:58 am, "muddogcoach": i had a problem with my neon i had to replace the egr it did not give a code for that and it sounds like.. »

http://Dodge-Neon.autoboardz.com/2002-Dodge-Neon-shift-ftopict225878.html (2002 Dodge Neon won't shift)
I have a 2002 Dodge Neon that I bought brand new. I haven't had too many problems with it (it has 80,000 miles) but it has always seemed to have a jumpy feeling (for about 2 years) when it shifted...

http://Dodge-Neon.autoboardz.com/Computer-2002-Dodge-Neon-SE-ftopict226230.html (Computer for 2002 Dodge Neon SE)
I have a computer checksum error on my 2002 Dodge Neon SE. This keeps the engine light on, and thanks to NY State, my car will not pass inspection if the check engine light is on. This computer erro..
« "Tom Rogers" wrote in message ...  ;> I have a computer checksum error on my 2002 Dodge Neon SE. This keeps the  ;> engine light.. »

http://Dodge-Neon.autoboardz.com/2002-Dodge-Neon-instrument-cluster-ftopict226306.html (2002 Dodge Neon instrument cluster)
If I replace a non-tach cluster with a tach equipped cluster from a salvage yard, will this mess up the odometer or is the mileage stored only in the BCM? Matt
« What a dumbass question. »
« Do you also write under whitingm1@hotmail??? DAS -- For direct contact replace nospam with schmetterling --- "Matt Whiting": »
« Dori A Schmetterling: No. Look at my long history of posts and look at what this idiot is writing and you tell me what you think. Also,.. »

http://Dodge-Neon.autoboardz.com/2002-Neon-ftopict226217.html (2002 Neon)
My neon, when I click the key to the run postion, all my gauges spaz out and jump around. My spedometer jumps from 120mph to100 to 80 increments of ten back to zero..go figure..all the other gauges ..
« "Tom Cahoone":  ;> My neon, when I click the key to the run postion, all my gauges spaz out  ;> and  ;> jump around. My spedo.. »
« "Tom Cahoone":  ;> My neon, when I click the key to the run postion, all my gauges spaz out and  ;> jump around. My spedometer jum.. »
« Replace the printed circuit board behind instument cluster Glenn Beasley Chrysler Tech "Tom Cahoone":  ;> My neon, when I click the ke.. »

http://Dodge-Neon.autoboardz.com/2002-Neon-error-ftopict250426.html (2002 Neon error)
We have a 2002 neon that won't start and is giving us a 0320 error "no reference signal from crankshaft position sensor detected during cranking". We changed out the sensor and it still wont start...

http://Dodge-Neon.autoboardz.com/2002-Neon-Problem-ftopict225618.html (2002 Neon Problem)
While driving tmy rpm gauge will start to fall down to zero and the car will stop. After it sits for a few minutes it will start up again with no problem. This only seems to happen when I go over 50..
« Do you have any problem when you are accelerating or under load? if you feel you lack power, it might be fuel filter otherwise it must be.. »
« PROBLEM SOLVED! Turned out I needed the cam position and crankshaft sensors replaced. Thanks for the replies! »
« theresa.mozzillo.DeleteThis@park.edu: Sure sounds like a bad fuel filter to me - - -- Posted via a free Usenet account from »

http://Dodge-Neon.autoboardz.com/Reliability-2002-2003-Neon-ftopict226325.html (Reliability of a 2002/2003 Neon)
Hi, I am looking to buy a used Neon 2002. The price and mileage are great, but I wonder about the reliability. Older Neon used to have alot of problems and recalls, in this generation reliable of ..
« It is muched improved but you can probably do better. Also it is discontinued model and value will go way down fast. "Dude": »

http://Dodge-Neon.autoboardz.com/2002-Neon-Spark-Plug-Wires-ftopict226240.html (2002 Neon Spark Plug Wires)
If someone would be cordial enough to answer my question that would be great. I've had to replace the spark plug wires 4 times on my 2002 Neon over the course of 2.5 years (105,000 km). Is this the ..
« The first questions are, who said they needed to be replaced and why? Blair Conrad:  ;> If someone would be cordial enough to answer m.. »
« And what brand of wires? "Mike Behnke":  ;> The first questions are, who said they needed to be replaced and why?  ;>  ;> &nbs.. »
« hmm who said they needed replacement??? and if they needed replacement why didnt you use OEM parts?? "Blair Conrad":  ;> If someone wo.. »

http://Dodge-Neon.autoboardz.com/removal-front-pads-2002-neon-ftopict225623.html (removal of front pads on 2002 neon)
When depressing the piston into its' bore to remove the front pads the outer pad retaining spring that is secured to the pad does not allow the c-clamp or bar clamp end to be placed flush against th..
« place a steel plate on the caliper piston and the C-clamp on top of the plate and back side of the caliper. Gently turn the C-clamp unti.. »
« Abby.Normal thanks for the reply. Slight misunderstanding. Shouldn't the plate you mention be placed over the exposed end of the outer pad.. »
« Hope this helps. They are zipped up so you can download them all in one file as opposed to saving each one. There are 5 pages total. "n.. »

http://Dodge-Neon.autoboardz.com/installation-ps-ac-belt-2002-neon-ftopict225608.html (installation of ps/ac belt on 2002 neon)
Chilton manual says to rotate tensioner pulley tang clockwise to remove belt and then "release" the tensioner to remove belt. To install belt rotate tensioner clockwise again to allow belt to slip o..
« "normie": If you had pulled the belt shield off and pulled on the belt you would see exactly how the tensioner is released. pull the belt .. »

http://Dodge-Neon.autoboardz.com/2002-Neon-brake-lights-turn-signals-ftopict225619.html (2002 Neon with no brake lights or turn signals)
This all started when to lo-beam headlights would not turn on. So I replaced the multifunction switch on to find that the connector was melted. I managed to get the new switch in with the old conn..
« binn....DeleteThis@gmail.com: if the headlight switch was melted somebody put the wrong kind of headlights in the car and thats what caused the headl.. »
« binneyj.DeleteThis@gmail.com: The brakes go through the signal light switch portion of the multi function switch on just about all cars today. If th.. »

http://Dodge-Neon.autoboardz.com/Resetting-2002-Neon-Check-Engine-Light-ftopict226261.html (Resetting 2002 Neon Check Engine Light)
Which Fuse to pull to resett the check engine light in a 2002 Neon. I did it once and can not remember which one. I pulled them all this time but light stays on so I must of forgot something in the ..
« :  ;> Which Fuse to pull to resett the check engine light in a 2002 Neon. I  ;> did it once and can not remember which one. I pull.. »
« "TNKEV":  ;>You could disconnect the battery for a while and it may go off, but if your  ;>vehicle is having a problem it will com.. »
« :  ;> "TNKEV"  ;>  ;>  ; ;> >You could disconnect the battery for a while and it may go off, but if your  ; .. »