 |
|
 |
|
Next: studebaker 1956 ground
|
| Author |
Message |
External

Since: Jun 18, 2007 Posts: 1
|
(Msg. 1) Posted: Mon Jun 18, 2007 12:55 pm
Post subject: 2000 GMC Jimmy keeps running (sometimes -- intermittent) Archived from groups: alt>autos>4x4>chevy-trucks (more info?)
|
|
|
About once in every five times i drive my 2000 GMC Jimmy, it keeps
running after I turn the key to the off position. The dashboard goes
out (all of the gauges stop working, too) but the engine keeps right
on running. The first time this happened I pulled the fuse to the ECM
and it stopped right away.
Here's the really odd part: out of desperation, I tried every button
in the cab the next time it happened. Lo and behold, turning the
hazard light on and off kills the engine. I also noticed that
sometimes I'll have my foot on the brake when I turn the engine off,
and the engine will keep running until I take my foot off the brake.
This may be related, I don't know: the right turn signal comes on an
stays on (doesn't blink). I tried replacing the blinker module behind
the glove compartment, but that didn't change anything. Left turn
signal works, and occasionally blinks fast like there's a bulb out,
then goes back to normal after a while. All the bulbs are fine.
Any thoughts? >> Stay informed about: 2000 GMC Jimmy keeps running (sometimes -- intermittent) |
|
| Back to top |
|
 |  |
External

Since: Oct 27, 2006 Posts: 174
|
(Msg. 2) Posted: Mon Jun 18, 2007 12:55 pm
Post subject: Re: 2000 GMC Jimmy keeps running (sometimes -- intermittent) [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
wrote:
> About once in every five times i drive my 2000 GMC Jimmy, it keeps
> running after I turn the key to the off position. The dashboard goes
> out (all of the gauges stop working, too) but the engine keeps right
> on running. The first time this happened I pulled the fuse to the ECM
> and it stopped right away.
>
> Here's the really odd part: out of desperation, I tried every button
> in the cab the next time it happened. Lo and behold, turning the
> hazard light on and off kills the engine. I also noticed that
> sometimes I'll have my foot on the brake when I turn the engine off,
> and the engine will keep running until I take my foot off the brake.
>
> This may be related, I don't know: the right turn signal comes on an
> stays on (doesn't blink). I tried replacing the blinker module behind
> the glove compartment, but that didn't change anything. Left turn
> signal works, and occasionally blinks fast like there's a bulb out,
> then goes back to normal after a while. All the bulbs are fine.
>
> Any thoughts?
>
Bad multifunction switch in the column.
--
Steve W.
Near Cooperstown, New York >> Stay informed about: 2000 GMC Jimmy keeps running (sometimes -- intermittent) |
|
| Back to top |
|
 |  |
| Related Topics: | 1999 Jimmy 4 wheel Intermittent - Hi, I`ve been having a problem with my 4wheel drive and, before I start parts changing, I figured I`d ask. What`s happening is that my Jimmy is dropping out of 4 wheel into 2 wheel. It`s intermittent, happens more often when its colder outside, dash....
'93 Jimmy 4x4,4.3,W : EST - Well I've read over alot of posts about this code, but I thought I try to put out another one: I posted earlier about my truck making a whineing sound. It ended up being a bad Intake manifold gasket. I had my shop do it, but a week later, I started to..
99 Jimmy - we have a problem, we have replaced our transfer case control module and for some reason it quit working again, someone told me that my encoder motor could be bad...How could I tell for sure?? When it does work the 4x4 shifts fine. this is on a 99..
01 Jimmy MPG Surprise - What a great surprise, I just did a 782 mile round trip from Queens NY to Mc Gaheysville, VA in my 01 Jimmy with average speed of a shade under 70. To my great surprise I got 21.6 MPG. This is such a great surprise because this gas pig only gives me 1...
99 JIMMY TCCM - I have been looking for a Transfer Case control module for a 99 Jimmy, it has to be the 4 button switch type for the NP8 transfer case, I have looked everyplace and no one has one, does anyone have any suggestions? |
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|
 |
|
|