1999 Ford Taurus

http://Hyundai-SantaFe.autoboardz.com/1999-Ford-Taurus-blower-motor-ftopict194740.html (1999 Ford Taurus blower motor question.)
Hi all We have/had (it's coming back nt. week) a 99 Taurus in the shop,with no speeds at all on the blower motor. Customer tested the blower motor,by " hot wiring" it,and so did I. Him and hid dad tested the resistor with an Ohm meter and said it "seemed" to be OK. I was checking it out, but I had..
« Why do you work for this company? Find a job with a real company. »
« I found this Post From: BOB URZ - view profile Date: Sun, Jul 14 2002 4:42 pm Email: BOB URZ Groups: alt.autos.ford That should be helpful Its pretty simple really. 12 volts from the fuse bo.. »
« Anthony... check out the Ford ASSET program.... (I think they call it that in the US). Most of the manufacturers have something similar... Yep... Google is our friend... »
« -snip- Tony.... you're one of the good guys. Knew the minute I read your OP, that Warman was gonna lite you up... but as you now know, it's not your fault. He's fighting a battle from the middl.. »

http://Hyundai-SantaFe.autoboardz.com/Parking-brake-indicator-ftopict217037.html (Parking brake indicator stays on)
1999 Ford Taurus. Parking brake "on" indicator just started to stay on. Parking brake is not on of course. Have tried to reset indicator by putting PB on then releasing, no joy there. Indicator turns off when regular brakes are applied. Any ideas on a fix or where to look to correct? thanks, Eric
« Check the brake fluid level in reservoir on top of engine. »
« Is it a parking brake indicator or a brake indicator? Jeff »
« Like we care. You don't need to be so formal. »
« Brake fluid level was a bit low. Filling it to the mark solved the problem. It was the one item I overlooked. Thanks for the help. Eric »

http://Hyundai-SantaFe.autoboardz.com/Taurus-CV-joint-replacement-ftopict223083.html (Taurus CV joint replacement?)
I don't see a NG for the Taurus and have posted here before, so does anyone have some tips for changing out the whole half shaft on a 1999 Ford Taurus? I am thinking that the procedure must be somewhat similar in both models. My buddy is having fits trying to change one by himself and has asked..

http://Hyundai-SantaFe.autoboardz.com/1999-Ford-Taurus-Starter-Removal-ftopict228084.html (1999 Ford Taurus Starter Removal)
I recently tried to remove the starter on my 1999 Ford Taurus 6cyl OHV. There are supposed to be two bolts holding the starter on. The first bolt was easily removed. However the second bolt hole had no head protruding. There is something in the bolt hole. I don't know if someone snapped a bol..