1999 ford 5.4l

FAQ

Profile

1999 ford 5.4l

AutoBoardz (Home) -> Ford/Mercury

Next: Console for Aerostar

Author

Message

chrisreynolds

External

Since: Nov 22, 2005
Posts: 3

(Msg. 1) Posted: Tue Nov 22, 2005 1:01 am
Post subject: 1999 ford 5.4l
Archived from groups: alt>autos>ford (more info?)

my number 3 cyl. has blown the sparkplug any ideas?

>> Stay informed about: 1999 ford 5.4l

someone57

External

Since: Jan 26, 2005
Posts: 50

(Msg. 2) Posted: Tue Nov 22, 2005 4:55 am
Post subject: Re: 1999 ford 5.4l [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"chrisreynolds" wrote in message

> my number 3 cyl. has blown the sparkplug any ideas?
Not exactly sure what you mean. The plug is broken? Replace them all.

>> Stay informed about: 1999 ford 5.4l

trainfan11

External

Since: Feb 29, 2004
Posts: 278

(Msg. 3) Posted: Tue Nov 22, 2005 7:59 am Post subject: Re: 1999 ford 5.4l [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

chrisreynolds wrote: > my number 3 cyl. has blown the sparkplug any ideas? > Known issue with this engine. Replace that cylinder head... not a one-day DIY job. Rob >> Stay informed about: 1999 ford 5.4l

chrisreynolds

External

Since: Nov 22, 2005
Posts: 3

(Msg. 4) Posted: Tue Nov 22, 2005 1:53 pm Post subject: Re: 1999 ford 5.4l [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

thank you. i took the time to locate the tool kit, it runs about $427.00 it sounds like agood deal. i will be trying this. rather than spending a $1000.00 on head work. but i will be looking for a used motor to rebuild. >> Stay informed about: 1999 ford 5.4l

chrisreynolds

External

Since: Nov 22, 2005
Posts: 3

(Msg. 5) Posted: Tue Nov 22, 2005 1:57 pm Post subject: Re: 1999 ford 5.4l [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

thank you. i took the time to locate the tool kit, it runs about $427.00 it sounds like agood deal. i will be trying this. rather than spending a $1000.00 on head work. but i will be looking for a used motor to rebuild. >> Stay informed about: 1999 ford 5.4l

Display posts from previous:

Related Topics:

1999 Ford Windstar SEL Leaky PCV Tube - I have the 3.8L engine. I am getting fresh oil dripping from the upper part of the pcv tube (near the IAC). The PCV valve appears to be doing its job, but I am going to change it anyway. There does not seem to be much blowby, at least with the simple....

Weird "Thumping" Noise on Highway...(1999 Ford Escort LX) - Hello, Here's what I'm currently driving: 1999 Ford Escort LX 88k miles Basically, I had some issues with the tires over the last month (two blowouts and a flat), so I had all four tires replaced. The next day, on the highway, I noticed a strange..

1999 Mercury with steering problem, please help - I have a 1999 Mercury Grand Marquis. Over the past couple days, the steering has become extremely tight. I checked the p.steering fluid, it was fine. I also checked the belts around the steering pump and they looked great. The only noise is a faint..

HELP HELP PLEASE!! 1989 Ford 150 ECO VAN - My van dies at will. At first if I'd wait 20 to 40 minutes it would start up as if nothing was wrong and I could go for days sometimes weeks. Finally it stopped and refused to start for nearly 9 hours. I have suspected a problem in the fuel line so..

Ford CVT - What's the word on CVT? I've been in a Ford 500 for a few weeks, and it is sure nice to drive. Wonder if I would feel the same way after 50,000 miles.

	AutoBoardz (Home) -> Ford/Mercury	All times are: Pacific Time (US & Canada)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum