1991 ford tempo

the motor for the electric winow might be burnt ou my advice is oo ake
apart the door panal and take a look at it, if not take it to a shop and
let them have a look at it.
 >> Stay informed about: 1991 ford tempo 

trickyvana wrote:
>
> the motor for the electric winow might be burnt ou my advice is oo ake
> apart the door panal and take a look at it, if not take it to a shop and
> let them have a look at it.

The nylon (Delrin) rollers in the window motor driven gear are worn out.
Replace the rollers with a 3-roller kit available at any auto parts
store. MANY write-ups on the 'Net about how to do this.
 >> Stay informed about: 1991 ford tempo 

Backyard Mechanic wrote:
> "wing5005" wrote:
>
> > my passenger electric window wont go back up. all the others work fine.
> > anybody got any ideas?
>
> It's Broke!
>
> Gonna have to pull the door panel to check it.
>
>
> --
> Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
> you pay..DEAL with it!

For an often temporary fix: Open the offending door with the key on.
Hold the button in the UP position, and sharply rap the lower center
area of the inside door panel SHARPLY with the side of your fist
(rubber mallet works also). Whack it good. This will temprrarily
"unstick" the motor and get the window up. Replace the motor.

To remove it, locate the motor "gearcase" by reaching inside the door
shell for the motor. (Assuming the door trim panel is removed). Look
for 2 dimples in the inner door panel in that area and a slot that
reveals one of the motor mounting screws (gold) . The dimples indicate
the location of the other 2 screws. Drill 3/8" holes, or bigger
depending in th diameter of your sockets, in the inner door panel at
the dimples. Use a 5/16" socket and extension to remove the three motor
bolts. Remove and reinstall the motor.
 >> Stay informed about: 1991 ford tempo 

On 20 Sep 2006 20:41:25 -0700, lsrx101 wrote:

> Backyard Mechanic wrote:
>> "wing5005" wrote:
>>
>>> my passenger electric window wont go back up. all the others work fine.
>>> anybody got any ideas?
>>
>> It's Broke!
>>
>> Gonna have to pull the door panel to check it.
>>
>>
>> --
>> Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
>> you pay..DEAL with it!
>
> For an often temporary fix: Open the offending door with the key on.
> Hold the button in the UP position, and sharply rap the lower center
> area of the inside door panel SHARPLY with the side of your fist
> (rubber mallet works also). Whack it good. This will temprrarily
> "unstick" the motor and get the window up. Replace the motor.
>
> To remove it, locate the motor "gearcase" by reaching inside the door
> shell for the motor. (Assuming the door trim panel is removed). Look
> for 2 dimples in the inner door panel in that area and a slot that
> reveals one of the motor mounting screws (gold) . The dimples indicate
> the location of the other 2 screws. Drill 3/8" holes, or bigger
> depending in th diameter of your sockets, in the inner door panel at
> the dimples. Use a 5/16" socket and extension to remove the three motor
> bolts. Remove and reinstall the motor.

Always check that the switch actually works before you start ripping the
door apart. Saves a lot of headaches. Atleast on the Tempo you can unscrew
the part of the doorpanel where the switch is mounted to get to the
underside of the switch, so it won't take you a headache and a lot of work
to check it. On most electric power windows that die, it's the switch that
goes, and not very often the actual motor. The motor can be dead though. It
all depends on how much it's used, and in what kind of weather. If the
motor has seased, and it's correded, it's recommendable to get the window
seals replaced to keep the water out, otherwise any motor you put in will
corrode as well.
 >> Stay informed about: 1991 ford tempo